RSi H2 AC Drive — Alarm- und Fehlercodes
Störcodes werden auf dem Bedienfeld-Display angezeigt.
| Code | Alarm |
|---|---|
| Over Current1 | Over Current1 |
| Over Voltage | Over Voltage |
| Low Voltage | Low Voltage |
| Low Voltage2 | Low Voltage2 |
| Ground Trip | Ground Trip |
| E-Thermal | E-Thermal |
| Out Phase Open | Out Phase Open |
| In Phase Open | In Phase Open |
| Inverter OLT | Inverter OLT |
| No Motor Trip | No Motor Trip |
| Over Load | Over Load |
| Under Load | Under Load |
| Ext-Brake | Ext-Brake |
| Over Heat | Over Heat |
| Over Current2 | Over Current2 |
| External Trip | External Trip |
| BX | BX |
| H/W-Diag | H/W-Diag |
| NTC Open | NTC Open |
| Fan Trip | Fan Trip |
| InFan Trip | InFan Trip |
| Thermal Trip | Thermal Trip |
| Lost KeyPad | Lost KeyPad |
| Fuse Open | Fuse Open |
| TB Trip | TB Trip |
| I/O Board Trip | I/O Board Trip |
| Check Line Plz | Check Line Plz |
| Damper Err | Damper Err |
| PC Repeat Err | PC Repeat Err |
| Pipe Broken | Pipe Broken |
| Level Detect | Level Detect |
| Broken Belt | Broken Belt |
| Lost Command | Lost Command |
| IO Board Trip | IO Board Trip |
| ParaWrite Trip | ParaWrite Trip |
| Option Trip-1 | Option Trip-1 |