B&R 0TB103.3

Name: B&R 0TB103.3
Brand: B&R Industrial Automation
SKU: 0TB103.3

Accessory terminal block, 3-pin male, screw clamp terminal block 1.5 mm², protected against vibration by the screw flange

Lifecycle & replacement

Lifecycle status not indexed

No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.

IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.

General information

Certifications / CE	Yes
Certifications / CRA (Cyber Resilience Act)	Not applicable
Certifications / ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
Certifications / UL	cULus E115267 Industrial control equipment
Certifications / DNV	Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck)
Certifications / BV	EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck

Terminal block

Connection cross section / AWG wire	26 to 14 AWG
Connection cross section / Wire end sleeves with plastic covering	0.20 to 1.50 mm²
Connection cross section / Single-wire	0.20 to 2.50 mm²
Connection cross section / Fine-stranded wires	0.20 to 1.50 mm²
Connection cross section / With wire end sleeve	0.20 to 1.50 mm²
Note	Protected against vibration by the screw flange Nominal data per UL
Number of pins	3 (male)
Type of terminal block	Screw clamp terminal block variant
Cable type	Only copper wires (no aluminum wires!)
Pitch	5.08 mm
Wire stripping length	13 mm

Electrical properties

Files hosted by B&R Industrial Automation; links open the official download page.

Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.

Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.