IAC

B&R 5ACPCE.XECM-00

PCIe EtherCAT master

Lifecycle & replacement

Lifecycle status not indexed

No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.

IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.

Technical specifications

General information
Diagnostics / Module statusYes, using LED status indicator and software
Diagnostics / Network statusYes, using LED status indicator and software
Diagnostics / Data transferYes, using LED status indicator
Certifications / CEYes
Certifications / CRA (Cyber Resilience Act)In preparation
Certifications / ULIn preparation
B&R ID code0x30E2
Configuration softwareAutomation Studio (version 4.12.x or later) / SYCONnet
Status indicatorsModule status, network status, data transfer
Controller
Memory / Memory size8 MB SDRAM
ProcessornetX 500
Dual-port memory64 kB
Fieldbus
Transfer / Physical layer100BASE-TX
Transfer / Half-duplexYes
Transfer / Full-duplexYes
Transfer / AutonegotiationYes
Transfer / Auto-MDI/MDIXYes
TypeEtherCAT (master)
Execution2x RJ45, shielded
Line lengthMax. 100 m between 2 stations (segment length)
Transfer rate100 Mbit/s
Cyclic dataMax. 4600 bytes (without LRW)
FunctionsTopology: Line or ring Data transport layer: ETH II, IEEE 802.3 100 Mbit, full-duplex Max. 388 slave modules Size of the file configuration. NXD max. 1 MB Mailbox protocols: CoE, EoE, FoE, SoE Interface check: Supported Slave station addresses: 1-14335
Electrical properties
Nominal voltage+3.3 V ±5%
Nominal currentMax. 800 mA
Operating conditions
Installation elevation above sea level / 0 to 2000 mNo limitation
Installation elevation above sea level / >2000 mReduction (derating) of the ambient temperature by 0.5°C per 100 m.
Degree of protection per EN 60529IP20
Ambient conditions
Temperature / Operation0 to 55°C
Temperature / Storage-40 to 85°C
Temperature / Transport-40 to 85°C
Relative humidity / Operation10 to 95%, non-condensing
Relative humidity / Storage10 to 95%, non-condensing
Relative humidity / Transport10 to 95%, non-condensing
Shock / Operation15 g, 11 ms
Shock / Storage30 g, 15 ms
Shock / Transport30 g, 15 ms
Mechanical properties
Dimensions / Width120 mm
Dimensions / Height86 mm
Dimensions / Depth18.5 mm
Installation in / B&R Automation PCYes (APC910, APC4100)
WeightMax. 150 g
SlotStandard PCIe x1 half-size module

Documentation & CAD

Files hosted by B&R Industrial Automation; links open the official download page.

Get a quote for a replacement

Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.

Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.