B&R 5ACPCI.RAIC-01
SATA RAID controller RAID level 0 (striped) and 1 (mirrored) 2 SATA hard disk drives (suitable for 24-hour operation) Only requires 1 PCI slot Transfer rates up to 150 MB/s This SATA RAID controller supports RAID level 0 and 1 and can be inserted in a PCI slot. The hard disks that are used are specified for 24-hour operation (24x7).
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / UL | cULus E115267 Industrial control equipment |
| Number of hard disks | 2 |
Controller
| Type | SiI 3512 SATA link |
| Specification | Serial ATA 1.0 |
| Data transfer rate | Max. 1.5 Gbit/s (150 MB/s) |
| RAID level | Supports RAID 0, 1 |
| BIOS extension ROM requirements | Approx. 32 kB |
Hard disk
| Data transfer rate / Internal | Max. 539 Mbit/s |
| Data transfer rate / To/From host | Max. 150 MB/s |
| Positioning time / Minimum (track to track) | 1.5 ms |
| Positioning time / Nominal (read access) | 10.5 ms |
| Positioning time / Maximum (read access) | 22 ms |
| Capacity | 60 GB |
| Number of heads | 3 |
| Number of sectors | 117,210,240 |
| Bytes per sector | 512 |
| Cache | 8 MB |
| Speed | 7200 rpm ±1% |
| Startup time | Typ. 4 s (from 0 rpm to read access) |
| Service life | 5 years |
| S.M.A.R.T. support | Yes |
| Access time | 4.2 ms |
| Supported transfer modes | SATA 1.0, PIO mode 0-4, multiword DMA mode 0-2, UDMA 0-5 |
Electrical properties
| Power consumption | 0.3 A at 3.3 V (PCI bus) 1 A at 5 V (PCI bus) |
Ambient conditions
| Temperature / Operation | 5 to 55°C |
| Temperature / 24-hour operation | 5 to 40°C |
| Temperature / Storage | -40 to 70°C |
| Temperature / Transport | -40 to 70°C |
| Relative humidity / Operation | 5 to 90%, non-condensing |
| Relative humidity / Storage | 5 to 95%, non-condensing |
| Relative humidity / Transport | 5 to 95%, non-condensing |
| Vibration / Operation (continuous) | 5 to 500 Hz: 0.125 g (1.225 m/s² 0-peak) duration 1 octave per minute, no damage |
| Vibration / Operation (occasional) | 5 to 500 Hz: 0.25 g (2.45 m/s² 0-peak) duration 1 octave per minute, no damage |
| Vibration / Storage | At max. 5 to 500 Hz: 5 g (49 m/s² 0-peak) duration 0.5 octaves per minute, no damage |
| Vibration / Transport | At max. 5 to 500 Hz: 5 g (49 m/s² 0-peak) duration 0.5 octaves per minute, no damage |
| Shock / Operation | At max. 125 g (1226 m/s² 0-peak) and 2 ms duration: No unrecoverable errors |
| Shock / Storage | At max. 400 g (3924 m/s² 0-peak) and 2 ms duration, no damage At max. 450 g (4424 m/s² 0-peak) and 1 ms duration, no damage At max. 200 g (1962 m/s² 0-peak) and 0.5 ms duration, no damage |
| Shock / Transport | At max. 400 g (3924 m/s² 0-peak) and 2 ms duration, no damage At max. 450 g (4424 m/s² 0-peak) and 1 ms duration, no damage At max. 200 g (1962 m/s² 0-peak) and 0.5 ms duration, no damage |
| Elevation / Operation | -300 to 3048 m |
| Elevation / Storage | -300 to 12192 m |
Mechanical properties
| Dimensions / Width | 70 mm |
| Dimensions / Length | 100 mm |
| Dimensions / Height | 9.5 mm |
| Installation | Permanent |
| Weight | 350 g |
Vendor information
| Manufacturer | Seagate |
| Manufacturer's product ID | Momentus 7200.1 ST96023AS |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Manuals
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.