IAC

B&R 5CAUPS.0005-01

The UPS connection cable, which is 0.5 m long, establishes the connection between the UPS interface option and the battery unit.

Lifecycle & replacement

Lifecycle status not indexed

No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.

IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.

Technical specifications

General information
Certifications / CEYes
Certifications / UKCAYes
Certifications / CRA (Cyber Resilience Act)Not applicable
Certifications / ULcULus E115267 Industrial control equipment
Certifications / HazLoccULus HazLoc E180196 Industrial control equipment for hazardous locations Class I, Division 2, Groups ABCD, T4
Cable construction
Outer jacket / MaterialThermoplastic PVC-based material
Outer jacket / ColorWindow gray (similar to RAL 7040)
Wire cross section2x 0.5 mm² (20 AWG) 2x 2.5 mm² (13 AWG)
Conductor resistanceAt 0.5 mm² max. 39 Ω/km At 2.5 mm² max. 7.98 Ω/km
Connector
Type4-pin screw clamp terminal block
Electrical properties
Test voltage / Wire - Wire1500 V
Operating voltageMax. 30 VDC
Peak operating voltageTyp. 30 VDC
Current-carrying capacity10 A at 20°C
Operating conditions
Pollution degree per EN 61131-2Pollution degree 2
Ambient conditions
Temperature / Moving-5 to 70°C
Temperature / Static-30 to 70°C
Mechanical properties
Dimensions / Length0.5 m
Dimensions / Diameter7 mm
Bend radius / Moving10x wire diameter
Bend radius / Fixed installation5x wire diameter
WeightApprox. 55 g

Documentation & CAD

Files hosted by B&R Industrial Automation; links open the official download page.

Get a quote for a replacement

Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.

Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.