B&R 5PC600.SE00-00
APC620 embedded system unit, connections for 2x RS232, 4x USB 2.0, Smart Display Link/DVI-I, 1x ETH 10/100, 1x POWERLINK, 1x CAN, 1x X2X, 512 kB SRAM, 24 VDC. (order screw clamp terminal block 0TB103.9 or cage clamp terminal block 0TB103.91 separately)
Lifecycle & replacement
Lifecycle status not indexed
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Battery / Type | Renata 950 mAh |
| Battery / Service life | 2½ years |
| Battery / Removable | Yes, accessible behind the orange cover |
| Battery / Variant | Lithium ion |
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Dongle port | Yes |
| LEDs | Power, CF, Link |
| B&R ID code | 0xA3BA |
| Cooling | Passive via heat sink |
| Power button | Yes |
| Reset button | Yes |
| Buzzer | Yes |
| Keyboard/Mouse | USB |
Controller
| Real-time clock / Accuracy | Component-dependent |
| Real-time clock / Battery-backed | Yes |
| Power failure logic / Controller | MTCX |
| Power failure logic / Buffer time | 10 ms |
| Graphics / Controller | Depends on the CPU board being used |
| SRAM / Size | 512 kB |
| SRAM / Battery-backed | Yes |
| SRAM / Remanent variables in power failure mode | 256 kB with 5PC600.X855-00 CPU boards 192 kB with CPU board 5PC600.X945-00 (for e.g. Automation Runtime, see Automation Help) |
| Bootloader | BIOS |
Interfaces
| COM1 / Type | RS232, modem supported, not galvanically isolated |
| COM1 / Variant | 9-pin male DSUB connector |
| COM1 / UART | 16550-compatible, 16-byte FIFO buffer |
| COM1 / Max. baud rate | 115 kbit/s |
| COM2 / Type | RS232, modem supported, not galvanically isolated |
| COM2 / Variant | 9-pin male DSUB connector |
| COM2 / UART | 16550-compatible, 16-byte FIFO buffer |
| COM2 / Max. baud rate | 115 kbit/s |
| CompactFlash slot 1 / Quantity | 2 |
| CompactFlash slot 1 / Type | Type I |
| USB / Quantity | 4 |
| USB / Type | USB 2.0 |
| USB / Variant | Type A |
| USB / Transfer rate | Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (480 Mbit/s) |
| USB / Current-carrying capacity | Max. 500 mA or 1 A per connection |
| Ethernet / Quantity | 1 |
| Ethernet / Variant | Shielded RJ45 port |
| Ethernet / Transfer rate | 10/100 Mbit/s |
| Ethernet / Max. baud rate | 100 Mbit/s |
| Panel/Monitor interface / Variant | Female DVI-I connector |
| Panel/Monitor interface / Type | SDL/DVI/Monitor |
| POWERLINK / Quantity | 1 |
| POWERLINK / Node switches | 2 |
| CAN / Quantity | 1 |
| CAN / Transfer rate | Max. 500 kbit/s |
| CAN / Node switches | Yes |
| CAN / Status LED | Yes |
| CAN / Terminating resistor | Yes, can be enabled via switch |
| X2X / Quantity | 1 |
| X2X / Status LED | Yes |
| Audio / Type | - |
| Audio / Inputs | - |
| Audio / Outputs | - |
| Add-on interface slot / Quantity | - |
Slots
| PCI slots / Quantity | - |
| PCI slots / Type | - |
| PCI slots / Variant | - |
| PCI slots / Standard | - |
| PCI slots / Bus speed | - |
| Slide-in drives | No |
| Slide-in compact drives | No |
| Add-on drives | No |
| Automation Panel Link slot | No |
| Add-on UPS slot | Yes |
| Slot for fan kit | No |
Electrical properties
| Nominal voltage | 24 VDC ±25% |
| Nominal current | 3.8 A |
| Inrush current | Typ. 7 A, max. 40 A for < 300 µs |
Operating conditions
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature / Operation | Component-dependent |
| Temperature / Storage | -20 to 60°C |
| Temperature / Transport | -20 to 60°C |
| Relative humidity / Operation | Component-dependent |
| Relative humidity / Storage | Component-dependent |
| Relative humidity / Transport | Component-dependent |
| Vibration / Operation (continuous) | 2 to 9 Hz: 1.75 mm amplitude / 9 to 200 Hz: 0.5 g |
| Vibration / Operation (occasional) | 2 to 9 Hz: 3.5 mm amplitude / 9 to 200 Hz: 1 g |
| Vibration / Storage | 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g |
| Vibration / Transport | 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g |
| Shock / Operation | 15 g, 11 ms |
| Shock / Storage | 30 g, 15 ms |
| Shock / Transport | 30 g, 15 ms |
| Elevation / Operation | Max. 3000 m (component-dependent) |
Mechanical properties
| Housing / Material | Galvanized plate |
| Housing / Front cover | Dyed orange plastic (similar to Pantone 144CV) |
| Housing / Coating | Light gray (similar to Pantone 427CV), dark gray (similar to Pantone 432CV) |
| Dimensions / Width | 68.3 mm |
| Dimensions / Height | 210 mm |
| Dimensions / Depth | 225.6 mm |
| Weight | Approx. 1400 g |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Manuals
ECAD / EPLAN
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.