B&R 5PC725.1505-00
15" TFT XGA color display Analog resistive touch screen IP65 protection Fan-free operation Flange output on top for mounting on a support arm system Panel PC 725 15" XGA, 15" XGA color TFT display with touch screen (resistive), connections for 1x RS232, 3x USB 2.0, 2x Ethernet 10/100, IP65 protection, 24 VDC. Flange installation on top. Order connector for power supply separately (screw clamp terminal block: 0TB103.9, cage clamp terminal block: 0TB103.91).
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Battery / Type | Renata 950 mAh |
| Battery / Service life | 4 years |
| Battery / Removable | Yes, accessible from the outside |
| Battery / Variant | Lithium ion |
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / UL | cULus E115267 Industrial control equipment |
| LEDs | No |
| B&R ID code | 0xB046 |
| Power button | No |
| Reset button | No |
| Buzzer | Yes |
Controller
| Power failure logic / Controller | MTCX |
| Power failure logic / Buffer time | 10 ms |
| Graphics / Controller | Component-dependent |
| SRAM / Size | - |
| SRAM / Battery-backed | - |
| Bootloader | AMI BIOS |
Display
| Viewing angles / Horizontal | Direction R / Direction L = 80° |
| Viewing angles / Vertical | Direction U / Direction D = 80° |
| Backlight / Type | LED |
| Backlight / Brightness | 350 cd/m² |
| Backlight / Half-brightness time | 50,000 h |
| Touch screen / Type | AMT |
| Touch screen / Technology | Analog, resistive |
| Touch screen / Controller | B&R, serial, 12-bit |
| Touch screen / Transmittance | 81% ±3% |
| Type | TFT color |
| Diagonal | 15" (381 mm) |
| Colors | 16 million |
| Resolution | XGA, 1024 x 768 pixels |
| Contrast | 800:1 |
Interfaces
| COM1 / Type | RS232, modem supported |
| COM1 / Variant | 9-pin male DSUB connector |
| COM1 / UART | 16550-compatible, 16-byte FIFO buffer |
| COM1 / Max. baud rate | 115 kbit/s |
| CompactFlash slot 1 / Type | Type I |
| USB / Quantity | 3 (2x rear, 1x side) |
| USB / Type | USB 2.0 |
| USB / Variant | Type A |
| USB / Transfer rate | Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (480 Mbit/s) |
| Ethernet / Quantity | 2 |
| Ethernet / Transfer rate | 10/100 Mbit/s |
| Ethernet / Max. baud rate | 100 Mbit/s |
| Add-on interface slot / Quantity | 1 |
Electrical properties
| Nominal voltage | 24 VDC ±25% |
| Nominal current | 1.4 A |
| Inrush current | Typ. 10 A, max. 40 A for < 300 μs |
| Power consumption | 28.5 W |
| Galvanic isolation | Yes |
Operating conditions
| Degree of protection per EN 60529 | IP65 (all sides, only with closed housing) |
Ambient conditions
| Temperature / Operation | 0 to 50°C |
| Temperature / Storage | -20 to 60°C |
| Temperature / Transport | -20 to 60°C |
| Relative humidity / Operation | T ≤ 40°C: 5 to 90%, non-condensing T > 40°C: < 90%, non-condensing |
| Relative humidity / Storage | T ≤ 40°C: 5 to 90%, non-condensing T > 40°C: < 90%, non-condensing |
| Relative humidity / Transport | T ≤ 40°C: 5 to 90%, non-condensing T > 40°C: < 90%, non-condensing |
| Vibration / Operation | 2 to 9 Hz: 3 mm amplitude / 9 to 200 Hz: 1 g |
| Vibration / Storage | 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g |
| Vibration / Transport | 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g |
| Shock / Operation | 15 g, 11 ms |
| Shock / Storage | 30 g, 6 ms |
| Shock / Transport | 30 g, 6 ms |
Mechanical properties
| Housing / Material | Aluminum, coated |
| Front / Panel overlay / Material | Polyester |
| Front / Frame | Aluminum, naturally anodized |
| Front / Design | Gray |
| Front / Gasket | Metamoll |
| Dimensions / Width | 426 mm |
| Dimensions / Height | 330 mm (without flange) 402 mm (with flange) |
| Dimensions / Depth | 58.7 mm (without flange) 83.2 mm (with flange) |
| Flange output | Top |
| Weight | 6.27 kg (without flange) |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Manuals
3D CAD models
ECAD / EPLAN
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.