B&R 5PC810.SX05-00
Slot for a bus unit with 4 PCI and 1 PCIe slots, 2 PCI and 3 PCIe slots or 5 PCI slots 512 kB SRAM onboard Insert for 1 slide-in compact drive and 2 slide-in drives Automation Panel Link slot for connecting Automation Panels via SDL APC810 system unit 5 slots (PCI Ex- press, PCI, depends on bus), 1 slot for Automation Panel Link transmitter, 1 slide-in compact and 2 slide-in slots, Smart Display Link/DVI/ monitor, 2x RS232, 5x USB 2.0, 2x ETH 10/100/1000, 24 VDC (order screw clamp terminal block 0TB103.9 or cage clamp terminal block 0TB103.91 separately)
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Battery / Type | Renata 950 mAh |
| Battery / Service life | 2½ years |
| Battery / Removable | Yes, accessible behind the orange front door |
| Battery / Variant | Lithium ion |
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / UL | cULus E115267 Industrial control equipment |
| Dongle port | Yes |
| LEDs | Power, HDD, Link 1, Link 2 |
| B&R ID code | 0xA3EE |
| Cooling | Passive via heat sink and optionally supported with an active fan kit |
| Power button | Yes |
| Reset button | Yes |
| Buzzer | Yes |
Controller
| Real-time clock / Battery-backed | Yes |
| Power failure logic / Controller | MTCX |
| Power failure logic / Buffer time | 10 ms |
| Graphics / Controller | Depends on the CPU board being used |
| SRAM / Size | 512 kB |
| SRAM / Battery-backed | Yes |
| SRAM / Remanent variables in power failure mode | 192 kB (for e.g. Automation Runtime, see Automation Help) |
| Bootloader | BIOS |
Interfaces
| COM1 / Type | RS232, modem supported, not galvanically isolated |
| COM1 / Variant | 9-pin male DSUB connector |
| COM1 / UART | 16550-compatible, 16-byte FIFO buffer |
| COM1 / Max. baud rate | 115 kbit/s |
| COM2 / Type | RS232, modem supported, not galvanically isolated |
| COM2 / Variant | 9-pin male DSUB connector |
| COM2 / UART | 16550-compatible, 16-byte FIFO buffer |
| COM2 / Max. baud rate | 115 kbit/s |
| CompactFlash slot 1 / Quantity | 1 |
| CompactFlash slot 1 / Type | Type I |
| CompactFlash slot 2 / Quantity | 1 |
| CompactFlash slot 2 / Type | Type I |
| USB / Quantity | 5 |
| USB / Type | USB 2.0 |
| USB / Variant | Type A |
| USB / Transfer rate | Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (480 Mbit/s) |
| USB / Current-carrying capacity | Max. 500 mA or 1 A per connection |
| Ethernet / Quantity | 2 |
| Ethernet / Variant | Shielded RJ45 port |
| Ethernet / Transfer rate | 10/100/1000 Mbit/s |
| Ethernet / Max. baud rate | 1 Gbit/s |
| Panel/Monitor interface / Variant | Female DVI-I connector |
| Panel/Monitor interface / Type | SDL/DVI/Monitor |
| CAN / Note | optional |
| Audio / Type | AC97 sound |
| Audio / Inputs | Microphone, Line In |
| Audio / Outputs | Line Out |
| Add-on interface slot / Quantity | 1 |
Slots
| PCI/PCIe slots / Quantity | 4 PCI and 1 PCIe slots or 2 PCI and 3 PCIe slots or 5 PCI slots |
| Slide-in drives | 2 |
| Slide-in compact drives | 1 |
| Automation Panel Link slot | Yes |
| Add-on UPS slot | Yes |
| Slot for fan kit | Yes |
Electrical properties
| Nominal voltage | 24 VDC ±25%, SELV |
| Nominal current | 6 A |
| Inrush current | Typ. 7 A, max. 50 A for < 300 µs |
| Overvoltage category per EN 61131-2 | II |
| Galvanic isolation | Yes |
Operating conditions
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature / Operation | Component-dependent |
| Temperature / Storage | -20 to 60°C |
| Temperature / Transport | -20 to 60°C |
| Relative humidity / Operation | Component-dependent |
| Relative humidity / Storage | Component-dependent |
| Relative humidity / Transport | Component-dependent |
| Vibration / Operation (continuous) | 2 to 9 Hz: 1.75 mm amplitude / 9 to 200 Hz: 0.5 g |
| Vibration / Operation (occasional) | 2 to 9 Hz: 3.5 mm amplitude / 9 to 200 Hz: 1 g |
| Vibration / Storage | 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g |
| Vibration / Transport | 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g / 200 to 500 Hz: 4 g |
| Shock / Operation | 15 g, 11 ms |
| Shock / Storage | 30 g, 15 ms |
| Shock / Transport | 30 g, 15 ms |
| Elevation / Operation | Max. 3000 m (component-dependent) |
Mechanical properties
| Housing / Material | Galvanized plate, plastic |
| Housing / Front cover | Dyed orange plastic (similar to Pantone 144CV) |
| Housing / Coating | Light gray (similar to Pantone 427CV), dark gray (similar to Pantone 432CV) |
| Dimensions / Width | 201.7 mm with heat sink 5AC801.HS00-00 and 5AC801.HS00-02 216.9 mm with heat sink 5AC801.HS00-01 |
| Dimensions / Height | 270 mm |
| Dimensions / Depth | 254.5 mm |
| Weight | Approx. 3900 g (component-dependent) |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Manuals
- Automation PC 810 User's Manual(de)
- Automation PC 810 User's Manual(en)
- Automation PC 810 with GM45 CPU board User's Manual(de)
- Automation PC 810 with GM45 CPU board User's Manual(en)
- Industrial PCs Benchmark Automation Runtime User's manual(de)
- Industrial PCs Benchmark Automation Runtime User's manual(en)
3D CAD models
ECAD / EPLAN
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.