B&R 5PC820.SX01-01
Specially developed to operate together with ACOPOSmulti Wall mounting 1 PCI Express compact slot SRAM, 1 MB onboard Integrated POWERLINK and CAN fieldbus interfaces APC820 system unit, wall mounting, 1 PCIec card slot, 2x CompactFlash slots, 1x RS232, 1x RS232/422/485, 1x POWERLINK, 1x CAN, Smart Display Link/DVI/monitor, 5x USB 2.0, 2x ETH 10/100/1000, 24 VDC via ACOPOSmulti rail.
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Battery / Type | Renata 950 mAh |
| Battery / Service life | 2 years |
| Battery / Removable | Yes, behind the cable cover |
| Battery / Variant | Lithium ion |
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / UL | cULus E115267 Industrial control equipment |
| Dongle port | Yes |
| LEDs | Power, CF, Link, Run, CAN, POWERLINK, IF slot |
| B&R ID code | 0xAD8A |
| Power button | Yes |
| Reset button | Yes |
| Buzzer | Yes |
| Cooling and mounting type | Wall mounting |
Controller
| Real-time clock / Accuracy | At 25°C: Typ. 12 ppm (1 second) per day |
| Real-time clock / Battery-backed | Yes |
| Power failure logic / Controller | MTCX |
| Power failure logic / Buffer time | 10 ms |
| Graphics / Controller | Intel Graphics Media Accelerator 950 |
| SRAM / Size | 1 MB |
| SRAM / Battery-backed | Yes |
| SRAM / Remanent variables in power failure mode | 128 kB (for e.g. Automation Runtime, see Automation Help) |
| Bootloader | BIOS |
| Cooling | Passive via heat sink and supported with an active fan kit |
Interfaces
| COM1 / Type | RS232, modem supported, not galvanically isolated |
| COM1 / Variant | DSUB, 9-pin, male |
| COM1 / UART | 16550-compatible, 16-byte FIFO buffer |
| COM1 / Max. baud rate | 115 kbit/s |
| COM2 / Type | RS232/422/485, galvanically isolated |
| COM2 / Variant | DSUB, 9-pin, male |
| COM2 / UART | 16550-compatible, 16-byte FIFO buffer |
| COM2 / Max. baud rate | 115 kbit/s |
| CompactFlash slot 1 / Type | Type I |
| CompactFlash slot 2 / Type | Type I |
| USB / Quantity | 5 |
| USB / Type | USB 2.0 |
| USB / Connection | To any USB type A interface |
| USB / Transfer rate | Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (480 Mbit/s) |
| USB / Current-carrying capacity | Max. 500 mA or 1 A per interface |
| Ethernet / Quantity | 2 |
| Ethernet / Transfer rate | 10/100/1000 Mbit/s |
| Ethernet / Max. baud rate | 1000 Mbit/s |
| Panel/Monitor interface / Variant | DVI-I |
| Panel/Monitor interface / Type | SDL/DVI/Monitor |
| POWERLINK / Quantity | 1 |
| POWERLINK / Node switches | 2 |
| POWERLINK / Status LED | Yes |
| CAN / Quantity | 1 |
| CAN / Transfer rate | Max. 500 kbit/s |
| CAN / Node switches | Yes |
| CAN / Status LED | Yes |
| CAN / Terminating resistor | Yes, can be enabled via switch |
Slots
| PCIec slots / Quantity | 1 |
Electrical properties
| Nominal voltage | 24 VDC ±25% |
| Nominal current | 5 A |
| Inrush current | Typ. 7 A, max. 50 A for < 300 µs |
Operating conditions
| Drop height | 0.25 m |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature / Operation | Component-dependent |
| Temperature / Storage | -20 to 60°C |
| Temperature / Transport | -20 to 60°C |
| Relative humidity / Operation | Component-dependent |
| Relative humidity / Storage | Component-dependent |
| Relative humidity / Transport | Component-dependent |
| Vibration / Operation | 2 to 9 Hz: 0.3 mm amplitude / 9 to 200 Hz: 0.1 g |
| Vibration / Storage | 2 to 9 Hz: 3.5 mm amplitude / 9 to 200 Hz: 1 g / 200 to 500 Hz: 1.5 g |
| Vibration / Transport | 2 to 9 Hz: 3.5 mm amplitude / 9 to 200 Hz: 1 g / 200 to 500 Hz: 1.5 g |
| Elevation / Operation | Max. 3000 m (component-dependent) |
Mechanical properties
| Housing / Material | Galvanized plate, plastic |
| Housing / Front cover | Polycarbonates, black |
| Housing / Cable cover | Polycarbonates, transparent |
| Dimensions / Width | 53 mm |
| Dimensions / Height | 344 mm |
| Weight | Approx. 2550 g |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
3D CAD models
ECAD / EPLAN
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.