B&R 7EC020.60-2
RS232 interface (IF1) for programming and configuring using B&R Automation Studio CAN interface (IF2) for connecting to a CAN network X2X Link interface (IF4) Ethernet interface (IF6) for connecting to an Ethernet network ARNCO (only on 7EC020.61-2) In addition, a maximum of three digital inputs / outputs are provided. The digital inputs and outputs can be configured individually as input or output. Additional functions such as a counter function with direction switching (stepper motor) or period and gate measurement are integrated. Embedded controller, x86 100 MHz Intel compatible, 32 MB DRAM, 32 kB SRAM, removable application memory: CompactFlash, 1 CAN interface, 1 X2X Link master interface, 1 Ethernet interface 100BASE-T, 1 RS232 interface, 3 digital mixed channels optionally configurable as inputs or outputs, 24 VDC, 0.5 A, order application memory separately! Order terminal blocks 0TB708 and 0TB704 separately!
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / UL | cULus E115267 Industrial control equipment |
| Module type | Embedded controller |
| Power consumption | <6 W |
Controller
| Operating system | AC140 (version E2.82 and later) |
| Processor clock | 100 MHz |
| DRAM | 32 MB |
| SRAM | 32 kB |
Inputs/Outputs
| Module-side connection | 8-pin multipoint connector |
| Configuration of digital inputs/outputs | Individually configurable as inputs or outputs |
Interfaces
| Interface IF1 / Type | RS232 |
| Interface IF1 / Variant | 9-pin male DSUB connector |
| Interface IF1 / Status indicators | 232 LED |
| Interface IF1 / Max. transfer rate | 115.2 kbit/s to 19200 kbit/s at 15 m |
| Interface IF2 / Type | CAN electrically isolated |
| Interface IF2 / Variant | 9-pin male DSUB connector |
| Interface IF2 / Status indicators | CAN LED |
| Interface IF2 / Max. transfer rate | 50 kbit/s at 1000 m to 500 kbit/s at 60 m |
| Interface IF2 / Network-capable | Yes |
| Interface IF2 / Bus terminating resistor | Externally wired |
| Interface IF4 / Type | X2X Link master electrically isolated |
| Interface IF4 / Variant | 4-pin multipoint connector |
| Interface IF4 / Status indicators | X2X LED |
| Interface IF4 / Max. distance | 100 m |
| Interface IF4 / Network-capable | YES, network topology: Line |
| Interface IF6 / Type | Ethernet IEEE 802.3 |
| Interface IF6 / Variant | Female RJ45 connector |
| Interface IF6 / Status indicators | ACT LED |
| Interface IF6 / Max. distance | 100 m |
| Interface IF6 / Transfer rate | 10/100 Mbit/s |
Incremental encoders
| Counter size | 16-bit |
| Input frequency | Max. 20 kHz |
| Evaluation | 4x |
| Signal form | Square wave pulse |
| Inputs | A/B on input 1/2, reference pulse on input 3 |
Digital inputs
| Quantity | Max. 3 |
| Input voltage | 24 VDC |
| Circuit | Sink |
| Input delay | <5 µs |
| Electrical isolation | Input - PLC |
Event counters
| Signal form | Square wave pulse |
| Input frequency | Max. 100 kHz |
| Inputs | Counter on input 1 |
| Pulse length | Min. 5 μs |
| Counter size | 32-bit |
Gate time measurement
| Signal form | Square wave pulse |
| Counter frequency | 31.25 kHz/4 MHz internal, max. 100 kHz external |
| Input frequency | Max. 100 kHz |
Period measurement
| Signal form | Square wave pulse |
| Input frequency | Max. 100 kHz |
| Counter frequency | 31.25 kHz/4 MHz internal, max. 100 kHz external |
Digital outputs
| Electrical isolation / Input - PLC | Yes |
| Nominal voltage | 24 VDC |
| Output protection | Shutdown in the event of overcurrent or short circuit |
| Nominal current | 500 mA |
| Switching frequency (resistive load) | Max. 100 Hz |
| Switching delay | Typ. 250 μs |
| Interface type | Max. 3 |
| Type | High-side transistor outputs, readable |
Operating conditions
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature / Operation | 0 to 45°C |
| Temperature / Storage | -25 to 55°C |
| Relative humidity / Operation | 5 to 95% |
Mechanical properties
| Dimensions / Width | 43 mm |
| Dimensions / Height | 122 mm |
| Dimensions / Depth | 110 mm |
| Note | Backup battery included in delivery |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Manuals
3D CAD models
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.