B&R 80MPD3.300S014-01
2-phase hybrid stepper motor, 56.4 mm flange, length 78.5 mm, ABR 24 VDC, 3 A series, 1.8 Nm holding torque, 1.25 Nm stall torque
Lifecycle & replacement
Lifecycle status not indexed
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
Short description
| Stepper motor | Stepper motor flange size 56.4 mm, length 78.5 mm, incremental encoder |
General information
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / CRA (Cyber Resilience Act) | Not applicable |
Specific motor data
| wiring | Serial |
| Current | 3 A |
| Resistance/Phase | 1.6 Ω |
| Inductance/Phase | 5.2 mH |
| Stall torque | 1.25 Nm |
| Holding torque | 1.8 Nm |
| Detent torque | <50 mNm |
| Rotor inertia | Approx. 245 gcm² |
General motor data
| Stepping angle | 1.8° |
| Max. surface temperature | 95°C |
| Average period of operation between failures | 21,000 hours |
| Shaft type | Flat-sided shaft (D-cut) |
| Insulation class | B (130°C) |
| Insulation resistance | 100 MΩ min. 500 VDC |
| Dielectric resistance | 500 VAC for 1 minute |
| Driver supply voltage | Max. 80 VDC |
Operating conditions
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature / Operation | -20 to 40°C |
| Temperature / Storage | -30 to 85°C |
| Temperature / Transport | -30 to 85°C |
| Relative humidity / Operation | 5 to 95%, non-condensing |
| Relative humidity / Storage | 5 to 95%, non-condensing |
| Relative humidity / Transport | 5 to 95%, non-condensing |
Electrical properties - Encoder
| Number of outputs | 3 A / B / R |
| Resolution | 1024 increments / 256 positions per rotation |
| Output circuit | Push/Pull level, asymmetrical |
| Output protection | Protection against short circuit |
| Current consumption | Max. 12 mA + Output load |
| Supply voltage | 18 to 30 VDC |
| Max. output current | ±10 mA per output |
Mechanical properties
| Max. radial load | 73.5 N |
| Max. axial load | The permissible axial load is not permitted to be greater than the motor mass. |
| Weight | 750 g |
| Length | 78.5 mm |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Manuals
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.