B&R 80PS080X3.10-01
Input: 3x 380 to 480 VAC ±10% Output voltage adjustable via X2X Link Status information readable via X2X Link Chopper output for connecting an external braking resistor 3-phase wide range input Closed metal housing Power supply module, Input 3x 380-480 VAC ±10%, Power output 24-80 VDC 16.6 A (max. 1000 W), Output 24 VDC 2 A, X2X Link interface, integrated brake chopper, wall mounting. Order terminal blocks separately!
View on our store →Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
Servo amplifiers, motors, encoders and cables are matched sets. If this part is no longer available in its original form, the manufacturer's newer generation usually will not pair with the rest of the axis, so an upgrade normally covers the drive, motor and cables together. Send us the nameplate details and we will confirm availability of an exact spare or scope a compatible upgrade.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Power consumption / Bus | 0.8 W |
| Electrical isolation / Mains input - Power output | Yes |
| Electrical isolation / Mains input - 24 VDC | Yes |
| Electrical isolation / Power output - 24 VDC | No |
| Electrical isolation / X2X Link - Mains input | Yes |
| Electrical isolation / X2X Link - Power output | Yes |
| Electrical isolation / X2X Link - 24 VDC | Yes |
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / CRA (Cyber Resilience Act) | In preparation |
| Certifications / UL | cULus E225616 Power conversion equipment |
| Certifications / KC | Yes |
| B&R ID code | 0xA7A9 |
| Status LED | Yes |
| Connection type | Maximum 25 m line length to the power supply module |
Mains input
| Fuse protection / Internal | Each phase internally fused (5 A) |
| Fuse protection / External | External fuse required for line protection |
| Input voltage range | 3x 380 to 480 VAC ±10% |
| Input current at full load | 3x 2.2 A at 400 VAC 3x 1.8 A at 480 VAC |
| Frequency range of mains voltage | 50 to 60 Hz ±5% |
| Phase failure detector | Yes |
| Power failure bypass | 10 ms (at full load) |
| Power factor (cos φ) | 0.72 @ 400 V 1 kW 0.69 @ 480 V 1 kW |
| Leakage current to PE | <3.5 mA |
| Protective circuit | Transient surge protection with varistor |
Power output
| Output current / 24 to 60 VDC | Max. 16.6 A continuous current |
| Output current / 60 to 80 VDC | Max. 16.6 to 12.5 A continuous current |
| Overload/Pulse capacity / Overload current | 20% overcurrent |
| Overload/Pulse capacity / Overload duration | 2 s |
| Output power | Max. 1000 W continuous power |
| Output protection | Short-circuit, overload and no-load proof |
| Control accuracy | ±2% |
| Power back immunity | Yes, <100 VDC |
| Output voltage | 24 to 80 VDC |
| Switch-on time | <5 s (does not apply during firmware update) |
| Parallel connection | Yes, max. 3 power supply units, for redundancy and increased power |
| Series connection | No |
| Max. capacitive load | Unlimited |
24 VDC voltage output
| Voltage range | 24 VDC ±10% |
| Output current | Max. 2 A continuous current |
| Output protection | Short-circuit, overload and no-load proof |
| Parallel connection | No |
Chopper output
| Output current / Output power / Continuous current / Continuous power | 30 A |
| Output current / Output power / Maximum current / Maximum power | 40 A |
| Response threshold for chopper activation | 29 to 95 VDC (adjustable) |
| Overtemperature protection (chopper-internal) | Yes |
Interfaces
| User interface / Variant | 10-pin terminal block |
| User interface / Type | X2X Link |
| User interface / Min. X2X Link cycle time | 250 µs |
Efficiency, reliability
| Power dissipation / Rated load | 90 W |
| Power dissipation / No-load operation | 30 W |
| Efficiency | >92% |
Operating conditions
| Mounting orientation / Vertical | Yes |
| Ventilation/Cooling | Internally controlled fan |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature / Operation | 0 to 50°C |
| Temperature / Storage | -25 to 85°C |
| Temperature / Transport | -25 to 85°C |
| Relative humidity / Operation | 5 to 95%, non-condensing |
| Relative humidity / Storage | 5 to 95%, non-condensing |
| Relative humidity / Transport | 5 to 95%, non-condensing |
Mechanical properties
| Dimensions / Width | 67.5 mm |
| Dimensions / Height | 257 mm |
| Dimensions / Depth | 219 mm |
| Material | Robust metal housing |
| Weight | 3.75 kg |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Datasheets
Manuals
3D CAD models
ECAD / EPLAN
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.