B&R 8AC130.60-1
Digital mixed module for installation in ACOPOS servo drives Maximum of 8 digital inputs or 10 digital outputs I/O configurable in pairs as inputs or outputs Incremental encoder functionality (A, B, R) Incremental encoder emulation ACOPOS plug-in module, 8 digital I/O configurable in pairs as 24 V inputs or outputs 400/100 mA, 2 digital outputs 2 A, order terminal block TB712 separately!
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
Servo amplifiers, motors, encoders and cables are matched sets. If this part is no longer available in its original form, the manufacturer's newer generation usually will not pair with the rest of the axis, so an upgrade normally covers the drive, motor and cables together. Send us the nameplate details and we will confirm availability of an exact spare or scope a compatible upgrade.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / CRA (Cyber Resilience Act) | Non-compliant |
| Certifications / UL | cULus E225616 Power conversion equipment |
| Certifications / KC | Yes |
| Module type | ACOPOS plug-in module |
| B&R ID code | 0x1068 |
| Slot | Slots 3 and 4 |
| Power consumption | Max. 0.8 W |
Inputs/Outputs
| Module-side connection | 12-pin multipoint connector |
| Status indicators | LED status indicator (24 V) |
| Configuration of digital inputs/outputs | Configurable in pairs as inputs or outputs |
Incremental encoders
| Inputs / Input 1 | Channel A |
| Inputs / Input 2 | Channel B |
| Inputs / Input 3 | Reference pulse R |
| Counter size | 16-bit |
| Input frequency | Max. 62.5 kHz |
| Evaluation | 4x |
| Signal form | Square wave pulse |
| Encoder monitoring | No |
| Counter frequency | Max. 250 kHz |
| Reference frequency | Max. 62.5 kHz |
| Distance between edges | Min. 2.5 µs |
Power supply
| Power supply / Minimum | 18 VDC |
| Power supply / Nominal | 24 VDC |
| Power supply / Maximum | 30 VDC |
| Voltage monitoring (24 V - LED) | Yes, supply voltage >18 V |
| Reverse polarity protection | Yes |
Digital inputs
| Switching threshold / Low | <5 V |
| Switching threshold / High | >15 V |
| Input voltage / Nominal | 24 VDC |
| Input voltage / Maximum | 30 VDC |
| Input current at nominal voltage / Channel 1-4 | Approx. 10 mA |
| Input current at nominal voltage / Channel 5-8 | Approx. 5.5 mA |
| Electrical isolation / Channel - ACOPOS | Yes |
| Electrical isolation / Channel - Channel | No |
| Switching delay / Channel 1-4 | Max. 5 µs |
| Switching delay / Channel 5-8 | Max. 35 µs |
| Quantity | Max. 8 |
| Circuit | Sink |
Event counters
| Inputs / Input 1 | Counter 1 |
| Inputs / Input 2 | Counter 2 |
| Signal form | Square wave pulse |
| Input frequency | Max. 100 kHz |
| Counter size | 16-bit |
Digital outputs
| Continuous current / Outputs 1 - 4 | Max. 100 mA |
| Continuous current / Outputs 5 - 8 | Max. 400 mA |
| Continuous current / Outputs 9 - 10 | Max. 2 A |
| Short-circuit current at 24 V (until cutoff) / Outputs 1 - 4 | Approx. 1 A |
| Short-circuit current at 24 V (until cutoff) / Outputs 5 - 8 | Approx. 1.2 A |
| Short-circuit current at 24 V (until cutoff) / Outputs 9 - 10 | Approx. 24 A |
| Electrical isolation / Output - ACOPOS | Yes |
| Electrical isolation / Output - Output | No |
| Switching frequency (resistive load) / Outputs 1 - 2 | Max. 10 kHz |
| Switching frequency (resistive load) / Outputs 3 - 4 | Max. 10 kHz |
| Switching frequency (resistive load) / Outputs 5 - 8 | Max. 5 kHz |
| Switching frequency (resistive load) / Outputs 9 - 10 | Max. 100 Hz |
| Switching voltage / Minimum | 18 VDC |
| Switching voltage / Nominal | 24 VDC |
| Switching voltage / Maximum | 30 VDC |
| Switching delay 0 → 1 and 1 → 0 / Outputs 1 - 4 | Max. 5 µs |
| Switching delay 0 → 1 and 1 → 0 / Outputs 5 - 8 | Max. 50 µs |
| Switching delay 0 → 1 and 1 → 0 / Outputs 9 - 10 | Max. 500 µs |
| Protection / Short-circuit proof | Yes |
| Protection / Overload-proof | Yes |
| Type / Outputs 1 - 4 | Push-Pull transistor outputs |
| Type / Outputs 5 - 10 | High-side transistor outputs |
| Quantity | Max. 10 |
| Readable outputs | Yes |
Ambient conditions
| Temperature / Operation / Nominal | 5 to 40°C |
| Temperature / Operation / Maximum | 55°C |
| Temperature / Storage | -25 to 55°C |
| Temperature / Transport | -25 to 70°C |
| Relative humidity / Operation | 5 to 85% |
| Relative humidity / Storage | 5 to 95% |
| Relative humidity / Transport | Max. 95% at 40°C |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Datasheets
Manuals
3D CAD models
ECAD / EPLAN
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.