B&R 8BAC0130.000-1
Digital mixed module for installation in ACOPOSmulti modules 2 inputs, +24 VDC 2 high-speed outputs, +24 VDC 2 standard readable outputs, +24 VDC ACOPOSmulti plug-in module, 2 digital outputs, 50 mA, max. 62.5 kHz, 2 digital outputs, 500 mA, max. 1.25 kHz, 2 digital inputs 24 VDC
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
Servo amplifiers, motors, encoders and cables are matched sets. If this part is no longer available in its original form, the manufacturer's newer generation usually will not pair with the rest of the axis, so an upgrade normally covers the drive, motor and cables together. Send us the nameplate details and we will confirm availability of an exact spare or scope a compatible upgrade.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / CRA (Cyber Resilience Act) | In preparation |
| Certifications / UL | cULus E225616 Power conversion equipment |
| Certifications / KC | Yes |
| Module type | ACOPOSmulti plug-in module |
| B&R ID code | 0xA9D6 |
| Slot | Slot 2 |
| Max. power consumption | 800 mW |
Module connection
| Module-side connection | 10-pin multipoint connector |
| Status indicators | UP LED (module OK) and DN LED (module NOT OK) |
Digital inputs
| Input voltage / Nominal | 24 VDC |
| Input voltage / Maximum | 30 VDC |
| Electrical isolation / Input - Input | No |
| Electrical isolation / Input - ACOPOSmulti | Yes |
| Quantity | 2 |
| Modulation compared to ground potential | Max. 30 V |
| Circuit | Sink |
| Input current at nominal voltage | Approx. 11 mA |
Digital outputs
| Continuous current / Outputs 1 - 2 | Max. 50 mA |
| Continuous current / Outputs 3 - 4 | Max. 500 mA |
| Short-circuit current at 24 V (until cutoff) / Outputs 1 - 2 | Approx. 0.2 A |
| Short-circuit current at 24 V (until cutoff) / Outputs 3 - 4 | Approx. 1.2 A |
| Electrical isolation / Output - ACOPOSmulti | Yes |
| Electrical isolation / Output - Output | No |
| Switching frequency (resistive load) / Outputs 1 - 2 | Max. 62.5 kHz |
| Switching frequency (resistive load) / Outputs 3 - 4 | Max. 1.25 kHz |
| Switching voltage / Minimum | 18 VDC |
| Switching voltage / Nominal | 24 VDC |
| Switching voltage / Maximum | 30 VDC |
| Switching delay 0 → 1 and 1 → 0 / Outputs 1 - 2 | Max. 1 µs |
| Switching delay 0 → 1 and 1 → 0 / Outputs 3 - 4 | Max. 50 µs |
| Type / Outputs 1 - 2 | Push-Pull |
| Type / Outputs 3 - 4 | High side |
| Protective measures / Short-circuit proof | Yes |
| Protective measures / Overload-proof | Yes |
| Modulation compared to ground potential / Outputs 3 - 4 | Max. 30 V |
| Quantity | 4 |
| Readable outputs | Yes |
Ambient conditions
| Temperature / Operation / Nominal | 5 to 40°C |
| Temperature / Operation / Maximum | 55°C |
| Temperature / Storage | -25 to 55°C |
| Temperature / Transport | -25 to 70°C |
| Relative humidity / Operation | 5 to 85% |
| Relative humidity / Storage | 5 to 95% |
| Relative humidity / Transport | Max. 95% at 40°C |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Datasheets
Manuals
ECAD / EPLAN
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.