B&R 8BAC0133.000-1
Encoder emulation module for installation in ACOPOSmulti modules 3 RS422 outputs ABR encoder emulation ACOPOSmulti plug-in module, 3 RS422 outputs for ABR encoder emulation, 1 MHz
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
Servo amplifiers, motors, encoders and cables are matched sets. If this part is no longer available in its original form, the manufacturer's newer generation usually will not pair with the rest of the axis, so an upgrade normally covers the drive, motor and cables together. Send us the nameplate details and we will confirm availability of an exact spare or scope a compatible upgrade.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / CRA (Cyber Resilience Act) | In preparation |
| Certifications / UL | cULus E225616 Power conversion equipment |
| Certifications / KC | Yes |
| Module type | ACOPOSmulti plug-in module |
| B&R ID code | 0xB37F |
| Slot | Slot 2 |
| Power consumption | Max. 2 W |
Module connection
| Module-side connection | 9-pin female DSUB connector, coded |
| Status indicators | UP LED (module OK) and DN LED (module NOT OK) |
| Max. cable length | 75 m |
| Terminating resistor | 120 Ω |
Digital outputs
| Switching delay / 0 → 1 | Max. 50 ns |
| Switching delay / 1 → 0 | Max. 50 ns |
| Output voltage / Minimum | 2 V |
| Output voltage / Nominal | 2.1 V |
| Output voltage / Maximum | 5.1 V |
| Electrical isolation / Output - ACOPOSmulti | Yes |
| Electrical isolation / Output - Output | No |
| Protective measures / Short-circuit proof | Yes |
| Protective measures / Overload-proof | Yes |
| Quantity | 3 |
| Peak short-circuit current | 250 mA |
| Switching frequency | Max. 1 MHz |
| Type | RS422 (differential) |
| Output status dependent on operating state | High resistance, until the software is initialized |
Ambient conditions
| Temperature / Operation / Nominal | 5 to 40°C |
| Temperature / Operation / Maximum | 55°C |
| Temperature / Storage | -25 to 55°C |
| Temperature / Transport | -25 to 70°C |
| Relative humidity / Operation | 5 to 85% |
| Relative humidity / Storage | 5 to 95% |
| Relative humidity / Transport | Max. 95% at 40°C |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Datasheets
Manuals
ECAD / EPLAN
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.