IAC

B&R 8BCE0018.1111A-0

Can be used in cable drag chains Assembled specifically for use with ACOPOSmulti drive systems and B&R servo motors with Y-Tec connectors speedtec - Innovative connector system for secure connections ACOPOSmulti EnDat 2.1 cable, length 18 m, 10x 0.14 mm² + 2x 0.5 mm², 17-pin speedtec EnDat connector, 15-pin D-type servo connector, can be used in cable drag chains

Lifecycle & replacement

Lifecycle status not indexed

No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.

Replacing or upgrading a servo component?

Servo amplifiers, motors, encoders and cables are matched sets. If this part is no longer available in its original form, the manufacturer's newer generation usually will not pair with the rest of the axis, so an upgrade normally covers the drive, motor and cables together. Send us the nameplate details and we will confirm availability of an exact spare or scope a compatible upgrade.

IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.

Technical specifications

General information
Certifications / CEYes
Certifications / UKCAYes
Certifications / CRA (Cyber Resilience Act)Not applicable
Certifications / ULcULus E225616 Power conversion equipment
Cable cross section5x 2x 0.14 mm² + 1x 2x 0.50 mm²
DurabilityOil resistance per VDE 0472 Part 803 as well as standard hydraulic oils
Cable construction
Supply lines / Quantity2
Supply lines / Wire insulationSpecial thermoplastic material
Supply lines / Wire colorsWhite/Green, white/red
Supply lines / VariantTinned copper stranded wire
Supply lines / Cross section0.5 mm²
Supply lines / ShieldNo
Supply lines / StrandingWhite/Red with white/green and filler elements
Signal line / Quantity10
Signal line / Wire insulationSpecial thermoplastic material
Signal line / Wire colorsBlue, brown, yellow, gray, green, pink, red, black, violet, white
Signal line / VariantTinned copper stranded wire
Signal line / Cross section0.14 mm²
Signal line / ShieldNo
Signal line / StrandingGreen with brown, gray with yellow, white with violet, black with red, pink with blue
Outer jacket / MaterialPUR
Outer jacket / ColorGreen, similar to RAL 6018 flat
Cable strandingWith terminating foil shield
Cable shieldCopper braiding, optical coverage >85% and foil shield
Connector
Type17-pin female speedtec EnDat connector
Mating cycles<500
Contacts17
Additional connectors15-pin male DSUB servo connector Mating cycles: <200 Contacts: 15 Degree of protection per EN 60529: IP20 when connected
Degree of protection per EN 60529IP66/67 when connected
Electrical properties
Test voltage / Wire - Wire1 kV
Test voltage / Wire - Shield0.8 kV
Conductor resistance / Supply lines≤40 Ω/km
Conductor resistance / Signal line≤140 Ω/km
Operating voltage≤30 Veff
Insulation resistance>200 MΩ*km
Ambient conditions
Temperature / Moving-20°C to +80°C
Temperature / Static-20°C to +90°C
Mechanical properties
Dimensions / Length18 m
Dimensions / Diameter7.85 mm ±0.2 mm
Bend radius / Single bend≥24 mm
Bend radius / Moving≥60 mm
Drag chain data / Acceleration≤6 g
Drag chain data / Flex cycles>3,000,000
Drag chain data / Velocity≤4 m/s
Weight1.44 kg

Documentation & CAD

Files hosted by B&R Industrial Automation; links open the official download page.

Get a quote for a replacement

Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.

Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.