B&R 8BCH0020.5221A-0
Assembled specifically for use with ACOPOSmulti drive systems and B&R servo motors ACOPOSmulti hybrid motor cable, length 20 m, 4x 2.5 mm² + 2x 0.75 mm² + 2x 0.24 mm² + 2x 2x 0.15 mm², 13-pin female hybrid motor connector made of stainless steel, food grade
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
Servo amplifiers, motors, encoders and cables are matched sets. If this part is no longer available in its original form, the manufacturer's newer generation usually will not pair with the rest of the axis, so an upgrade normally covers the drive, motor and cables together. Send us the nameplate details and we will confirm availability of an exact spare or scope a compatible upgrade.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / CRA (Cyber Resilience Act) | Not applicable |
| Certifications / UL | cULus E225616 Power conversion equipment |
| Cable cross section | 4x 2.5 mm² + 2x 0.75 mm² + (2x 0.24 mm² + 2x 2x 0.15 mm²) |
| Durability | Oil resistance per EN 60811-2-1 |
| Certification | UL AWM style 21223, 80°C, 1000 and CSA C22.2 no. 210 I/II A/B FT1, FDA Code of Federal Regulations, Title 21 (CFR21), section 177.1550 "Perfluorocarbon resins" |
Cable construction
| Power lines / Quantity | 4 |
| Power lines / Wire insulation | Special thermoplastic material |
| Power lines / Wire colors | Black, brown, blue, yellow/green |
| Power lines / Execution | Tinned copper stranded wire |
| Power lines / Cross section | 2.5 mm² |
| Power lines / Shield | No |
| Power lines / Stranding | No |
| Supply lines / Quantity | 2 |
| Supply lines / Wire insulation | Special thermoplastic material |
| Supply lines / Wire colors | White/Blue, white/green |
| Supply lines / Execution | Tinned copper stranded wire |
| Supply lines / Cross section | 0.24 mm² |
| Supply lines / Shield | Yes |
| Supply lines / Stranding | No |
| Signal line / Quantity | 6 |
| Signal line / Wire insulation | Special thermoplastic material |
| Signal line / Wire colors | Blue/Green, white/green, gray/pink, yellow/violet |
| Signal line / Execution | Tinned copper stranded wire |
| Signal line / Cross section | 2x 0.75 mm², 4x 0.15 mm² |
| Signal line / Shield | 0.75 mm² shielded in pairs, cable shield (4x 0.15 mm²), tinned copper braiding, optical coverage >85% and foil shield |
| Signal line / Stranding | White/Blue with white/green, pink with gray and yellow with violet |
| Outer jacket / Material | FEP |
| Outer jacket / Color | Orange, similar to RAL 2003 flat |
| Outer jacket / Labeling | B&R 4x2.5 + 2x0.75 + (2x2x26AWG + 2x1x24AW) * E130266 * UL AWM STYLE 21619 150°C 1000 V FT1 |
| Cable stranding | With filler elements and foil shield |
| Cable shield | Tinned copper braiding, optical coverage >85% and foil shield |
Connector
| Type | 13-pin female stainless steel circular connector |
| Mating cycles | <500 |
| Contacts | 13 |
| Additional connectors | 9-pin male DSUB connector Mating cycles: <200 Contacts: 9 Degree of protection per EN 60529: IP20 when connected |
| Degree of protection per EN 60529 | IP69K when connected |
Electrical properties
| Test voltage / Wire - Wire | 4 kV |
| Test voltage / Wire - Shield | 4 kV |
| Conductor resistance / Power lines | ≤8.2 Ω/km |
| Conductor resistance / Supply lines | ≤84 Ω/km |
| Conductor resistance / Signal line | 0.75 mm²: ≤26 Ω/km, 0.15 mm²: ≤140 Ω/km |
| Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Wall mounting | 27.3 A |
| Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Installed in conduit or cable duct | 23.7 A |
| Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Installed in cable tray | 29.1 A |
| Insulation resistance | ≤500 Ω*km |
Ambient conditions
| Temperature / Moving | -20°C to +150°C |
| Temperature / Static | -20°C to +150°C |
Mechanical properties
| Dimensions / Length | 20 m |
| Dimensions / Diameter | 12.7 mm ±0.3 mm |
| Bend radius / Single bend | >52 mm |
| Bend radius / Moving | ≥104 mm |
| Weight | 6.3 kg |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Datasheets
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.