IAC

B&R 8BCM0012.11140-0

Cable extension for 1.5 mm² motor cables with speedtec/standard connector size 1, length 12 m, can be used in cable drag chains

Lifecycle & replacement

Lifecycle status not indexed

No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.

Replacing or upgrading a servo component?

Servo amplifiers, motors, encoders and cables are matched sets. If this part is no longer available in its original form, the manufacturer's newer generation usually will not pair with the rest of the axis, so an upgrade normally covers the drive, motor and cables together. Send us the nameplate details and we will confirm availability of an exact spare or scope a compatible upgrade.

IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.

Technical specifications

General information
Certifications / CEYes
Certifications / UKCAYes
Certifications / CRA (Cyber Resilience Act)Not applicable
Certifications / ULcULus E225616 Power conversion equipment
Cable cross section4x 1.5 mm² + 2x 2x 0.75 mm²
DurabilityOil resistance per VDE 0472 Part 803 as well as standard hydraulic oils
Cable construction
Power lines / Quantity4
Power lines / Wire insulationSpecial thermoplastic material
Power lines / Wire colorsBlack, brown, blue, yellow/green
Power lines / VariantTinned copper stranded wire
Power lines / Cross section1.5 mm²
Power lines / ShieldNo
Power lines / StrandingNo
Signal line / Quantity4
Signal line / Wire insulationSpecial thermoplastic material
Signal line / Wire colorsWhite, white/red, white/blue, white/green
Signal line / VariantTinned copper stranded wire
Signal line / Cross section0.75 mm²
Signal line / ShieldIndividually shielded in pairs, tinned copper braiding, optical coverage >85% and foil shield
Signal line / StrandingWhite with white/red and white/blue with white/green
Outer jacket / MaterialPUR
Outer jacket / ColorOrange, similar to RAL 2003 flat
Cable strandingWith filler elements and foil shield
Cable shieldTinned copper braiding, optical coverage >85% and foil shield
Connector
Type8-pin female speedtec motor connector
Mating cycles<500
Contacts8 (4 power and 4 signal contacts)
Additional connectors8-pin male coupling Mating cycles: >50 Contacts: 8 Degree of protection per EN 60529: IP67 when connected
Degree of protection per EN 60529IP67 when connected
Electrical properties
Test voltage / Wire - Wire3 kV
Test voltage / Wire - Shield3 kV
Conductor resistance / Power lines≤0.07 Ω
Conductor resistance / Signal line≤0.15 Ω
Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Wall mounting20 A
Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Installed in conduit or cable duct17.8 A
Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Installed in cable tray20.9 A
Insulation resistance>40 GΩ
Ambient conditions
Temperature / Moving-10 to 80°C
Temperature / Static-40 to 90°C
Mechanical properties
Dimensions / Length12 m
Dimensions / Diameter12.8 mm ±0.4 mm
Bend radius / Single bend>40 mm
Bend radius / Moving≥99 mm
Drag chain data / Acceleration<60 m/s²
Drag chain data / Flex cycles≥3000000
Drag chain data / Velocity≤4 m/s
Weight3.13 kg

Documentation & CAD

Files hosted by B&R Industrial Automation; links open the official download page.

Get a quote for a replacement

Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.

Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.