B&R 8BCM0023.1322A-0
Can be used in cable drag chains Assembled specifically for use with ACOPOSmulti drive systems and B&R servo motors with motor connector size 1.5 speedtec - Innovative connector system for secure connections Integrated shield plate A shield plate is attached to ACOPOSmulti 8BCM motor cables. If this shield plate is correctly installed on the respective ACOPOSmulti 8BVI inverter module, no additional shielding measures are necessary. ACOPOSmulti motor cable, length 23 m, 4x 4 mm² + 2x 0.75 mm² + 2x 1 mm², 8-pin female speedtec motor connector size 1.5, integrated shield plate, can be used in cable drag chains
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
Servo amplifiers, motors, encoders and cables are matched sets. If this part is no longer available in its original form, the manufacturer's newer generation usually will not pair with the rest of the axis, so an upgrade normally covers the drive, motor and cables together. Send us the nameplate details and we will confirm availability of an exact spare or scope a compatible upgrade.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / CRA (Cyber Resilience Act) | Not applicable |
| Certifications / UL | cULus E225616 Power conversion equipment |
| Cable cross section | 4 x 4.0 mm² + 2 x 0.75 mm² + 2 x 1.0 mm² |
| Durability | Oil resistance per HD 22.10 appendix A and DIN EN 60811-404 |
Cable construction
| Power lines / Quantity | 4 |
| Power lines / Wire insulation | PP |
| Power lines / Wire colors | Black, brown, blue, yellow/green |
| Power lines / Variant | Tinned copper stranded wire |
| Power lines / Cross section | 4 mm² |
| Power lines / Shield | No |
| Power lines / Stranding | No |
| Signal line / Quantity | 4 |
| Signal line / Wire insulation | PP |
| Signal line / Wire colors | White, white/red, white/blue, white/green |
| Signal line / Variant | Tinned copper stranded wire |
| Signal line / Cross section | 2 x 0.75 mm² + 2 x 1.0 mm² |
| Signal line / Shield | Individually shielded in pairs, tinned copper braiding, optical coverage >85% and foil shield |
| Signal line / Stranding | White with white/red and white/blue with white/green |
| Outer jacket / Material | TPU |
| Outer jacket / Color | Orange, similar to RAL 2003 flat |
| Cable stranding | With filler elements and foil shield |
| Cable shield | Tinned copper braiding, optical coverage >85% and foil shield |
Connector
| Type | 8-pin female speedtec motor connector, size 1.5 |
| Mating cycles | <500 |
| Contacts | 8 (4 power and 4 signal contacts) |
| Degree of protection per EN 60529 | IP66/67 when connected |
Electrical properties
| Test voltage / Wire - Wire | 4 kV |
| Test voltage / Wire - Shield | 4 kV |
| Conductor resistance / Power lines | ≤5.1 Ω/km |
| Conductor resistance / Signal line | 0.75 mm²: ≤26.7 Ω/km, 1 mm²: ≤20 Ω/km |
| Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Wall mounting | 36.40 A |
| Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Installed in conduit or cable duct | 31.85 A |
| Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Installed in cable tray | 38.22 A |
| Operating voltage | Max. 1000 VAC (UL) |
| Insulation resistance | ≥500 MΩ*km |
Ambient conditions
| Temperature / Moving | -20°C to +80°C |
| Temperature / Static | -20°C to +90°C |
Mechanical properties
| Dimensions / Length | 23 m |
| Dimensions / Diameter | 15.4 mm ±0.4 mm |
| Bend radius / Single bend | >48 mm |
| Bend radius / Moving | >119 mm |
| Drag chain data / Acceleration | Max. 50 m/s² (depends on the length of the travel path) |
| Drag chain data / Flex cycles | ≥5,000,000 |
| Drag chain data / Velocity | Max. 300 m/min |
| Weight | 6.4 kg |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Datasheets
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.