B&R 8BVF0220H000.000-1
Wide mains input voltage range Optimally suited for ACOPOSmulti 8BVP power supply modules Compliance with limit values per CISPR11, group 2, class A ACOPOSmulti line filter, 22.5 A, 480 V
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
Servo amplifiers, motors, encoders and cables are matched sets. If this part is no longer available in its original form, the manufacturer's newer generation usually will not pair with the rest of the axis, so an upgrade normally covers the drive, motor and cables together. Send us the nameplate details and we will confirm availability of an exact spare or scope a compatible upgrade.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / CRA (Cyber Resilience Act) | Not applicable |
| Certifications / UL | cULus E225616 Power conversion equipment |
| Certifications / KC | Yes |
| Cooling and mounting type | Wall mounting |
Mains connection
| Reduction of continuous current depending on ambient temperature / Face-up mounting orientation | - |
| Reduction of continuous current depending on ambient temperature / Vertical mounting orientation | No reduction |
| Reduction of continuous current depending on installation elevation / Starting at 1000 m above sea level | 1.8 Aeff |
| Variant / Shield connection / On mains | No |
| Variant / Shield connection / On device | Yes |
| Variant / L1, L2, L3, PE and L1´, L2´, L3´, PE | Connector |
| Variant / U1, V1, W1 | - |
| Variant / U2, V2, W2 | - |
| Variant / PE | M5 threaded bolt |
| Terminal connection cross section / Flexible and fine-stranded wires / With wire end sleeve | 0.5 to 16 mm² |
| Terminal connection cross section / Approbation data / UL/C-UL-US | 20 to 6 AWG |
| Terminal connection cross section / Approbation data / CSA | 20 to 6 AWG |
| Permissible network configurations | TT, TN |
| Mains input voltage | 3x 220 to 3x 480 VAC ±10% |
| Frequency | 50 / 60 Hz ±4% |
| Allocation to power supply module | 8BVP0220HC00.000-1 8BVP0220HW00.000-1 |
| Continuous current | 22.5 Aeff |
| Peak current <10 s | 56 Aeff |
| Reduction of continuous current at ambient temperatures starting at 40°C | No reduction |
| Power dissipation at nominal current | 85 W |
| Integrated line filter per EN 61800-3, category C3 | Yes |
| Terminal cable cross section dimension of shield connection | 12 to 22 mm |
| Inductance | - |
Fan connector
| Variant / F+, F- | Connector |
| Terminal connection cross section / Flexible and fine-stranded wires / With wire end sleeve | 0.25 to 2.5 mm² |
| Terminal connection cross section / Approbation data / UL/C-UL-US | 30 to 12 AWG |
| Terminal connection cross section / Approbation data / CSA | 28 to 12 AWG |
| Connection voltage | 24 VDC |
| Max. power consumption during operation (PFan8BVF...) | 8.25 W |
Temperature sensor connection
| Variant / T+, T- | Connector |
| Terminal connection cross section / Flexible and fine-stranded wires / With wire end sleeve | 0.25 to 2.5 mm² |
| Terminal connection cross section / Approbation data / UL/C-UL-US | 30 to 12 AWG |
| Terminal connection cross section / Approbation data / CSA | 28 to 12 AWG |
Electrical properties
| Discharge capacitance | 14.1 µF |
Operating conditions
| Permissible mounting orientations / Hanging vertically | Yes |
| Permissible mounting orientations / Horizontal, face up | Yes |
| Permissible mounting orientations / Standing horizontally | No |
| Installation elevation above sea level / Nominal | 0 to 500 m |
| Installation elevation above sea level / Maximum | 4000 m |
| Pollution degree per EN 61800-5-1 | 2 (non-conductive pollution) |
| Overvoltage category per EN 61800-5-1 | III |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature / Operation / Nominal | 5°C to 40°C |
| Temperature / Operation / Maximum | 55°C |
| Temperature / Storage | -25°C to 55°C |
| Temperature / Transport | -25°C to 70°C |
| Relative humidity / Operation | 5 to 85% |
| Relative humidity / Storage | 5 to 95% |
| Relative humidity / Transport | Max. 95% at 40°C |
Mechanical properties
| Dimensions / Width | 135 mm |
| Dimensions / Height | 378 mm |
| Dimensions / Depth | 212 mm |
| Weight | 11.6 kg |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Datasheets
Manuals
3D CAD models
ECAD / EPLAN
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.