IAC

B&R 8CCH01X5.11110-1

Can be used in cable drag chains Assembled specifically for use with ACOPOSremote/ACOPOSmotor drive systems Hybrid connector system for secure connections Hybrid cable, length 1.50 m, 2x 2x 0.34 mm² + 4x 0.75 mm² + 5x 2.5 mm², 2x 15-pin female TYCO connector, can be used in cable drag chains

Lifecycle & replacement

Lifecycle status not indexed

No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.

Replacing or upgrading a servo component?

Servo amplifiers, motors, encoders and cables are matched sets. If this part is no longer available in its original form, the manufacturer's newer generation usually will not pair with the rest of the axis, so an upgrade normally covers the drive, motor and cables together. Send us the nameplate details and we will confirm availability of an exact spare or scope a compatible upgrade.

IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.

Technical specifications

General information
Certifications / CEYes
Certifications / UKCAYes
Certifications / CRA (Cyber Resilience Act)Not applicable
Certifications / ULcULus E225616 Power conversion equipment
Cable cross section5x 2.5 mm² + 2x 2x 0.75 mm² + 2x 2x 0.34 mm² / 1.55- 100 VZN
DurabilityIn preparation
Cable construction
Power lines / Quantity5
Power lines / Wire insulationPE
Power lines / Wire colorsBlack, red, brown, white, yellow/green
Power lines / ExecutionTinned copper stranded wire
Power lines / Cross section2.5 mm²
Power lines / ShieldNo
Power lines / StrandingNo
Signal line / Quantity4
Signal line / Wire insulationPE
Signal line / Wire colorsPink/Blue, violet/gray
Signal line / ExecutionTinned copper stranded wire
Signal line / Cross section0.75 mm²
Signal line / ShieldYes
Signal line / StrandingYes
Data lines / Quantity4
Data lines / Wire insulationPE
Data lines / Wire colorsVZN (cat. 5)
Data lines / ExecutionTinned copper stranded wire
Data lines / Cross section0.34 mm²
Data lines / ShieldYes
Data lines / StrandingYes
Outer jacket / MaterialPUR
Outer jacket / ColorOrange, similar to RAL 2003 flat
Cable strandingWith filler elements and foil shield
Cable shieldTinned copper braiding, optical coverage >85% and foil shield
Connector
Type15-pin female TYCO connector
Mating cyclesMax. 20
Contacts15
Degree of protection per EN 60529IP65
Electrical properties
Test voltage / Wire - Wire2.5 mm²: 3 kV 0.75 mm²: 2 kV 0.34 mm²: 2 kV
Test voltage / Wire - Shield2.5 mm²: 3 kV 0.75 mm²: 1 kV 0.34 mm²: 1 kV
Conductor resistance / Power lines≤8 Ω/km
Conductor resistance / Signal line≤26 Ω/km
Conductor resistance / Data lines≤56 Ω/km
Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Wall mounting23.7 A
Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Installed in conduit or cable duct27.3 A
Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Installed in cable tray29.1 A
Operating voltagePower lines: ≤1000 V Signal lines: ≤1000 V Data lines: ≤100 V
Insulation resistance≥500 MΩ*km
Ambient conditions
Temperature / Moving-40°C to +80°C
Temperature / Static-40°C to +80°C
Mechanical properties
Dimensions / Length1.5 m
Dimensions / Diameter14.6 mm ±0.4 mm
Bend radius / Single bend>60 mm
Bend radius / Moving≥150 mm
Drag chain data / AccelerationMax. 50 m/s² (depends on the length of the travel path)
Drag chain data / Flex cycles≥5,000,000
Drag chain data / SpeedMax. 300 m/min
Weight0.53 kg

Documentation & CAD

Files hosted by B&R Industrial Automation; links open the official download page.

Get a quote for a replacement

Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.

Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.