B&R 8CH010.12-3
Can be used in cable drag chains Motor and encoder lines in one cable Assembled specifically for use with ACOPOS servo drives 8V1180/1320 and B&R servo motors with option "Single-cable solution (hybrid)" speedtec - Innovative connector system for secure connections ACOPOS hybrid motor cable, length 10 m, 4x 4 mm² + 2x 1 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², 13-pin female speedtec hybrid motor connector size 1, can be used in cable drag chains
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
Servo amplifiers, motors, encoders and cables are matched sets. If this part is no longer available in its original form, the manufacturer's newer generation usually will not pair with the rest of the axis, so an upgrade normally covers the drive, motor and cables together. Send us the nameplate details and we will confirm availability of an exact spare or scope a compatible upgrade.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / CRA (Cyber Resilience Act) | Not applicable |
| Certifications / UL | cULus E225616 Power conversion equipment |
| Cable cross section | 4x 4 mm² + 2x 1 mm² + (2x 1x 0.30 mm² + 2x 2x 0.15 mm²) |
| Durability | Oil resistance per EN 60811-2-1 |
| Certification | E130266 cRUus AWM style 21223, 80°C, 1000 V and CSA C22.2 no. 210 I/II A/B FT1 |
Cable construction
| Power lines / Quantity | 4 |
| Power lines / Wire insulation | PP |
| Power lines / Wire colors | Black, brown, blue, yellow/green |
| Power lines / Variant | Copper stranded wire |
| Power lines / Cross section | 4 mm² |
| Power lines / Shield | No |
| Power lines / Stranding | No |
| Supply lines / Quantity | 2 |
| Supply lines / Wire insulation | PP |
| Supply lines / Wire colors | White/Blue, white/green |
| Supply lines / Variant | Tinned copper stranded wire |
| Supply lines / Cross section | 1 mm² |
| Supply lines / Shield | No |
| Supply lines / Stranding | No |
| Signal line / Quantity | 6 |
| Signal line / Wire insulation | PP |
| Signal line / Wire colors | Brown/Green, white/green, gray/pink, yellow/violet |
| Signal line / Variant | 2x copper stranded wire, 4x tinned copper stranded wire |
| Signal line / Cross section | 2x 0.30 mm², 4x 0.15 mm² |
| Signal line / Shield | Tinned copper braiding, optical coverage >85% and foil shield |
| Signal line / Stranding | Brown/Green with white/green, pink with gray and yellow with violet |
| Outer jacket / Material | PUR |
| Outer jacket / Color | Orange, similar to RAL 2003 flat |
| Outer jacket / Labeling | B&R 4x4 + 2x1 + (2x2 26AWG + 2x1x 23AWG) *E130266* cRUus AWM STYLE 21223* AWM I/II A/B 80°C 1000 V FT1 |
| Cable stranding | With filler elements and foil shield |
| Cable shield | Tinned copper braiding, optical coverage >85% and foil shield |
Connector
| Type | 13-pin female speedtec hybrid motor connector |
| Mating cycles | <500 |
| Contacts | 13 |
| Additional connectors | 9-pin male DSUB connector Mating cycles: <200 Contacts: 9 Degree of protection per EN 60529: IP20 when connected |
| Degree of protection per EN 60529 | IP66/67 when connected |
Electrical properties
| Test voltage / Wire - Wire | 4 kV |
| Test voltage / Wire - Shield | 4 kV |
| Conductor resistance / Power lines | ≤5 Ω/km |
| Conductor resistance / Supply lines | ≤19.5 Ω/km |
| Conductor resistance / Signal line | 0.30 mm²: ≤68 Ω/km, 0.15 mm²: ≤140 Ω/km |
| Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Wall mounting | 30 A |
| Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Installed in conduit or cable duct | 30 A |
| Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Installed in cable tray | 30 A |
| Insulation resistance | ≥200 MΩ*km |
Ambient conditions
| Temperature / Moving | -20°C to +90°C |
| Temperature / Static | -20°C to +90°C |
Mechanical properties
| Dimensions / Length | 10 m |
| Dimensions / Diameter | 15.7 mm ±0.4 mm |
| Bend radius / Single bend | >48 mm |
| Bend radius / Moving | ≥121 mm |
| Drag chain data / Acceleration | Max. 50 m/s² (depends on the length of the travel path) |
| Drag chain data / Flex cycles | ≥3,000,000 |
| Drag chain data / Velocity | Max. 300 m/min |
| Weight | 3.9 kg |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Datasheets
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.