B&R 8EAC0150.001-1
ACOPOS P3 plug-in module, digital multi-encoder interface
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
Servo amplifiers, motors, encoders and cables are matched sets. If this part is no longer available in its original form, the manufacturer's newer generation usually will not pair with the rest of the axis, so an upgrade normally covers the drive, motor and cables together. Send us the nameplate details and we will confirm availability of an exact spare or scope a compatible upgrade.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Certifications / CE | Yes |
| Certifications / CRA (Cyber Resilience Act) | In preparation |
| Certifications / UL | cULus E225616 Power conversion equipment |
| Certifications / KC | Yes |
| Module type | ACOPOS P3 plug-in module |
| B&R ID code | 0xE827 |
| Slot | Slot 1 |
| Max. power consumption | P[W] = (15 V * IEncoder[A]) + 2 W Max. 6.5 W |
Encoder interfaces
| Electrical isolation / Encoder - ACOPOS P3 | No |
| Encoder power supply / Protective measures / Short-circuit proof | Yes |
| Encoder power supply / Protective measures / Overload-proof | Yes |
| Encoder power supply / Output voltage | Configurable Typ. 11.45 V ±0.1 V / 5.2 V ±0.1 V |
| Encoder power supply / Load capacity | Max. 300 mA (HIPERFACE DSL: Max. 200 mA) |
| Encoder power supply / Sense lines | 2, compensation of max. 2x 0.7 V |
| Synchronous serial interface / Differential voltage / Minimum | 2.0 V |
| Synchronous serial interface / Differential voltage / Maximum | 6.0 V |
| Synchronous serial interface / Signal transmission | RS485 |
| Synchronous serial interface / Data transfer rate | Depends on the configured encoder type |
| Quantity | 1 |
| Type | Digital multi-encoder interface, configurable |
| Connections | 8-pin female Mini I/O connector |
| Status indicators | None |
| Max. encoder cable length | 75 m Depends on the cross section of the power supply wires in the encoder cable |
Support
| Motion system / mapp Motion | 5.1.0 and higher |
| Motion system / ACP10/ARNC0 | 5.01.0 and higher |
Ambient conditions
| Temperature / Operation / Nominal | -25 to 55°C |
| Temperature / Operation / Maximum | 55°C |
| Temperature / Storage | -25 to 55°C |
| Temperature / Transport | -25 to 70°C |
| Relative humidity / Operation | 5 to 85% |
| Relative humidity / Storage | 5 to 95% |
| Relative humidity / Transport | Max. 95% at 40°C |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Datasheets
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.