B&R 8ECH0015.1A21C-0
ACOPOS P3 hybrid motor cable EnDat 3, length 15 m, 4x 0.75 mm² + 2x 0.34 mm² + 2x 24 AWG, series 915 8-pin female motor connector, Mini I/O 8-pin male connector, can be used in cable drag chains
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
Servo amplifiers, motors, encoders and cables are matched sets. If this part is no longer available in its original form, the manufacturer's newer generation usually will not pair with the rest of the axis, so an upgrade normally covers the drive, motor and cables together. Send us the nameplate details and we will confirm availability of an exact spare or scope a compatible upgrade.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Cable cross section | 4x 0.75 mm² + 2x 0.34 mm² + 2x 24 AWG |
| Durability | Oil resistance per EN 50363-10-2 |
| Certification | E170315 cURus AWM STYLE 21209 90°C 1000 V - AWM I/II A/B 90°C 1000 V FT1 YY/WW |
Cable construction
| Power lines / Quantity | 4 |
| Power lines / Wire insulation | PP |
| Power lines / Wire colors | Black U/L1/C/L+, black V/L2, black W/L3/D/L, yellow/green |
| Power lines / Variant | Copper stranded wire |
| Power lines / Cross section | 0.75 mm² |
| Power lines / Shield | No |
| Power lines / Stranding | No |
| Supply lines / Quantity | 2 |
| Supply lines / Wire insulation | PP |
| Supply lines / Wire colors | Black |
| Supply lines / Variant | Copper stranded wire |
| Supply lines / Cross section | 0.34 mm² |
| Supply lines / Shield | Tinned copper braiding, optical coverage >90% and foil shield |
| Supply lines / Stranding | 2 elements (black no. 5-6) and 2 filling elements |
| Signal line / Quantity | 2 |
| Signal line / Wire insulation | PP |
| Signal line / Wire colors | Blue, white |
| Signal line / Variant | 2x copper stranded wire |
| Signal line / Cross section | 2x 24 AWG |
| Signal line / Shield | Tinned copper braiding, optical coverage >85% and foil shield |
| Signal line / Stranding | Two insulated wires are twisted into a pair. |
| Outer jacket / Material | PUR |
| Outer jacket / Color | Orange, similar to RAL 2003 flat |
| Outer jacket / Labeling | B&R 4 G 0.75 + 1x(2x0.34)C + 1x(2xAWG24)C C E170315 cURus AWM STYLE 21209 AWM I/II A/B 90°C 1000 V FT1 CE |
| Cable stranding | With filler elements and foil shield |
| Cable shield | Tinned copper braiding, optical coverage >85% and foil shield |
Connector
| Type | Series 915 8-pin female hybrid motor connector |
| Mating cycles | <500 |
| Contacts | 8 |
| Additional connectors | 8-pin male Mini I/O encoder connector Mating cycles: <1500 Contacts: 8 Degree of protection per EN 60529: IP30 when connected |
| Degree of protection per EN 60529 | IP66/67 when connected |
Electrical properties
| Test voltage / Wire - Wire | 3 kV |
| Test voltage / Wire - Shield | 3 kV |
| Conductor resistance / Power lines | ≤26 Ω/km |
| Conductor resistance / Supply lines | ≤53 Ω/km |
| Conductor resistance / Signal line | ≤87.7 Ω/km |
| Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Wall mounting | 13 A |
| Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Installed in conduit or cable duct | 11.5 A |
| Current-carrying capacity per DIN VDE 0298 part 4, table 11 / Installed in cable tray | 13.5 A |
| Insulation resistance | ≥500 MΩ*km |
Ambient conditions
| Temperature / Moving | -40°C to +90°C |
| Temperature / Static | -40°C to +90°C |
Mechanical properties
| Dimensions / Length | 15 m |
| Dimensions / Diameter | 10.70 mm ±0.25 mm |
| Bend radius / Single bend | >32.1 mm |
| Bend radius / Moving | ≥80.25 mm |
| Drag chain data / Acceleration | Max. 50 m/s² (depends on the length of the travel path) |
| Drag chain data / Flex cycles | ≤3,000,000 |
| Drag chain data / Velocity | Max. 300 m/min |
| Weight | 2.625 kg |
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.