B&R 8I0FS024.100-1
Additional EMC filters are intended to reduce line-conducted emissions from the mains supply to a level under the limits specified in IEC/EN 61800-3, category C1, C2 or C3 in environment 1 (public mains) or 2 (industrial mains) depending on the inverter power. The data for determining the permitted length of the shielded motor cable can be found in the characteristics for the ACOPOSinverter S44 device under "Line-conducted and radiated emissions". Additional EMC filters can only be used for TN (neutral) and TT (neutral-ground) connection types. 24 A EMC filter for ACOPOSinverter S44 (1-phase 100-120 V, 0.75 kW and 200-240 V, 1.5-2.2 kW).
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / CRA (Cyber Resilience Act) | Not applicable |
| Certifications / KC | Yes |
| Conformity to standard | EN 133200 |
Mains connection
| Power dissipation | - |
| Max. nominal voltage | 1x 240 VAC +10% |
| Nominal filter current | 24 A |
| Max. fault current | 30 mA |
Operating conditions
| Installation elevation above sea level | - |
| Degree of protection per EN 60529 | - |
| Max. relative humidity per IEC 60068-2-3 | 93% |
| Ambient temperature | 50°C |
| Maximum installation elevation | - |
Ambient conditions
| Temperature / Storage | - |
Mechanical properties
| Weight | 1.455 kg |
| Installation | Under the frequency inverter |
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.