B&R 8I84T200037.01P-1
ACOPOSinverter P84, 3x 200 to 240 V, 0.37 kW, integrated EMC filter and brake chopper, shield plate included in delivery, POWERLINK interface.
Lifecycle & replacement
Lifecycle status not indexed
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
General information
| Certifications / CE | Yes |
| Certifications / UL | cULus E225616 Power conversion equipment |
| Certifications / KC | Yes |
Motor power
| Specified on nameplate, 3-phase | 0.37 kW 0.5 PS |
Mains connection
| Max. mains current with optional mains choke / At 230 VAC | 1.6 A |
| Mains current / At 200 VAC | 3.5 A |
| Mains current / At 240 VAC | 3.1 A |
| Mains input voltage, 3-phase | 3x 200 VAC -15% to 240 VAC +10% |
| Frequency | 50 to 60 Hz ±5% |
| Apparent power (at 240 VAC) | 1.3 kVA |
| Max. assumed short-circuit current (Isc) (short-circuit current at connection point) | 5 kA |
| Power dissipation at nominal load and nominal clock frequency | 46 W |
| Integrated EMC filter | Yes |
Line-conducted and radiated emissions
| With integrated filter / Motor cable length per IEC/EN 61800-3 Cat. C1 environment 1 (public power network) | - |
| With integrated filter / Motor cable length per IEC/EN 61800-3 Cat. C2 environment 1 (public power network) | ≤10 m / ≤5 m |
| With integrated filter / Motor cable length per IEC/EN 61800-3 Cat. C3 environment 2 (industrial power system) | ≤10 m / ≤5 m |
| With add-on filter / Motor cable length per IEC/EN 61800-3 Cat. C1 environment 1 (public power network) | ≤50 m / ≤20 m |
| With add-on filter / Motor cable length per IEC/EN 61800-3 Cat. C2 environment 1 (public power network) | ≤100 m / ≤50 m |
| With add-on filter / Motor cable length per IEC/EN 61800-3 Cat. C3 environment 2 (industrial power system) | ≤100 m / ≤50 m |
| With add-on filter | 8I0FT012.300-1 |
Motor connection
| Derating of continuous output current depending on ambient temperature / At nominal clock frequency (4 kHz or 2.5 kHz with higher inverter power) | No derating (up to 50°C) |
| Derating of continuous output current depending on ambient temperature / Other clock frequencies | The derating curves are included in the installation instructions, which can be downloaded from the website (www.br-automation.com). |
| Derating of continuous output current depending on installation elevation / Starting at 1000 m above sea level | 1%, per 100 m |
| Max. continuous output current (In) / At 230 VAC, 3-phase | 3 A |
| Nominal clock frequency / Min. | 1 kHz |
| Nominal clock frequency / Max. | 16 kHz |
| Braking torque / With braking resistor | Up to 150% of the rated motor torque |
| Braking torque / Without braking resistor (typical value) | 30% of the rated motor torque |
| Max. motor cable length / Shielded cable | 50 m |
| Max. motor cable length / Non-shielded cable | 100 m |
| Motor control profiles / Induction motor | Flux vector control (FVC) with encoder (voltage vector) (current vector) Flux vector control (SFVC) without encoder (voltage or current vector) Voltage/frequency ratio - V/f characteristic curve (2 or 5 points) ENA energy adjustment system for asymmetrical loads |
| Max. transient current for 60 s, 3-phase | 4.5 A |
| Max. transient current for 2 s, 3-phase | 4.9 A |
| Output frequency range | 0.5 to 599 Hz |
| Nominal clock frequency | 4 kHz |
| Short-term overload torque (typical value) | 170% of the motor's rated torque (typical value at ±10%) for 60 s 220% of the motor's rated torque (typical value at ±10%) for 2 s |
| Main protective functions of inverter | Thermal protection against power stage overheating Protection against short circuits between the motor phases, line phase failures, overcurrent between output phases and ground, overvoltages on the DC bus, interruptions in the control loop, exceeding the speed limit. Safety function for: Over- and undervoltage of the power supply system, line phase failure with 3-phase supply |
| Motor protection | Thermal protection integrated in the inverter through continually calculating the l²t value while taking the speed into consideration: -The thermal state of the motor is stored when the frequency inverter is switched off. -The functionality can be adjusted according to the motor type (external cooling or self-cooling) using an operator interface. Protection against motor phase failures Protection provided by PTC sensors |
Brake chopper
| Integrated dynamic brake transistors | Yes |
| Operating ratio for dynamic brake transistors | The dynamic brake transistor is designed to tolerate the following values: -Nominal motor power continuously -150% of the nominal motor power for 60 s |
| Min. resistance value (external) | 44 Ω |
24 VDC power supply
| Input voltage | 24 VDC (min. 19 V, max. 30 V) |
| Power consumption | 30 W |
Available internal power supplies
| Output voltage 24 VDC / Max. output current at 24 VDC | 200 mA |
| Output voltage 10.5 VDC / Max. output current 10.5 VDC | 10 mA |
| Output voltage 24 VDC | 24 VDC (min. 21 V, max. 27 V) |
| Output voltage 10.5 VDC | 10.5 VDC ±5% |
Safe input - Power removal
| Switching threshold / Low | <5 V |
| Switching threshold / High | >15 V |
| Electrical isolation / Input - ACOPOSinverter | Yes |
| Electrical isolation / Input - Input | No |
| Quantity | 1 |
| Nominal voltage | 24 VDC |
| Response time | ≤100 ms |
| Input impedance | 1.5 kΩ |
| Input circuit | Sink |
Interfaces
| POWERLINK / Type | Type 3 |
Digital inputs
| Electrical isolation / Input - ACOPOSinverter | Yes |
| Electrical isolation / Input - Input | No |
| Quantity | 6 |
| Nominal voltage | 24 VDC |
| Input circuit | Source or sink |
| Sampling time | <2 ms ±0.5 ms |
| Input impedance | 3.5 kΩ |
Analog inputs
| Electrical isolation / Input - Input | No |
| Electrical isolation / Input - ACOPOSinverter | Yes |
| Input / Voltage | ±10 V |
| Input / Voltage/Current | 0 to 10 V or 0 to 20 mA |
| Input impedance / Voltage | 30 kΩ |
| Input impedance / Current | 242 Ω |
| Quantity | 2 |
| Resolution | ±11 bits |
| Sampling time | <2 ms ±0.5 ms |
Relay outputs
| Switching capacity / Max. / With resistive load (cos φ = 1 and L/R = 0 ms) | 2 A for 250 VAC or 30 VDC |
| Switching capacity / Max. / With inductive load (cos φ = 0.4 and L/R = 7 ms) | 1.5 A for 250 VAC or 30 VDC |
| Switching capacity / Min. | 3 mA for 24 VDC |
| Variant / Relay 1 | 1 NO contact and 1 NC contact with a common point |
| Variant / Relay 2 | 1 NO contact |
| Electrical isolation / Output - ACOPOSinverter | Yes |
| Electrical isolation / Output - Output | No |
| Quantity | 2 |
| Nominal voltage | 30 VDC / 250 VAC |
| Switching capacity | Max. 2 A for 250 VAC or 30 VDC with resistive load |
| Response time (max.) | <7 ms ±0.5 ms |
Analog outputs
| Electrical isolation / Output - ACOPOSinverter | Yes |
| Electrical isolation / Output - Output | No |
| Max. load impedance / Voltage | 470 Ω |
| Max. load impedance / Current | 500 Ω |
| Quantity | 1 |
| Output | 0 to 10 V or 0 to 20 mA |
| Update time | <2 ms ±0.5 ms |
| Resolution | 10-bit |
Operating conditions
| Installation elevation above sea level | 0 to 1000 m |
| Degree of protection per EN 60529 | Upper part: IP21 and IP41 Lower part: IP54 (heat sink) |
| Ambient temperature | -10 to 50°C |
| Max. ambient temperature | Up to 60°C |
| Relative humidity per IEC 60068-2-3 | 5 to 95%, non-condensing No dripping water |
| Maximum installation elevation | Up to 3000 m |
| Max. pollution degree per IEC/EN 61800-5-1 | 2 (non-conductive pollution) |
| Ambient conditions per IEC 60721-3-3 | Class 3C1 and 3S2 |
| Operating position | Vertical mounting orientation ±10% |
Ambient conditions
| Temperature / Storage | -25 to 70°C |
| Vibration / Operation | 3 to 13 Hz: 1.5 mm amplitude / 13 to 200 Hz: 1 g |
| Shock / Operation | 15 g, 11 ms |
Mechanical properties
| Dimensions / Width | 130 mm |
| Dimensions / Height | 230 mm |
| Dimensions / Depth | 175 mm |
| Weight | 3 kg |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
3D CAD models
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.