IAC

B&R 8KSJ86.ee015ff00-h

Synchronous motor, external cooling, water-cooled, flange mounting, B-side foot mounting possible, size 8, length 6, nominal speed 1500 rpm.

Lifecycle & replacement

Lifecycle status not indexed

No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.

Replacing or upgrading a servo component?

Servo amplifiers, motors, encoders and cables are matched sets. If this part is no longer available in its original form, the manufacturer's newer generation usually will not pair with the rest of the axis, so an upgrade normally covers the drive, motor and cables together. Send us the nameplate details and we will confirm availability of an exact spare or scope a compatible upgrade.

IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.

Technical specifications

Motor
Nominal speed nN [rpm]1500
Number of pole pairs3
Nominal torque Mn [Nm]345
Nominal power PN [W]54192
Nominal current IN [A]112
Stall torque M0 [Nm]360
Stall current I0 [A]118
Maximum torque Mmax [Nm]665
Maximum current Imax [A]240
Maximum speed nmax [rpm]4300
Torque constant KT [Nm/A]3.2
Voltage constant KE [V/1000 rpm]207
Stator resistance R2ph [Ω]0.116
Stator inductance L2ph [mH]4.6
Electrical time constant tel [ms]40.167
Thermal time constant ttherm [min]13
Moment of inertia J [kgcm²]840
Weight without brake m [kg]140
Holding brake
Holding torque of brake MBr [Nm]200
Mass of brake [kg]0
Moment of inertia of brake JBr [kgcm²]0
Recommendations
ACOPOSmulti 8BVIxxxx...1650
Cross section for B&R motor cables [mm²]0
Connector typeTerminal box

Documentation & CAD

Files hosted by B&R Industrial Automation; links open the official download page.

Get a quote for a replacement

Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.

Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.