IAC

B&R X20IF1053-1

DeviceNet slave (adapter) Integrated terminating resistor The interface module is equipped with a DeviceNet interface. This allows the B&R system (I/O modules, POWERLINK, etc.) to be connected to systems from other manufacturers and makes it possible to quickly and easily transfer data in both directions. The interface module can be operated in the X20 controllers or in the expandable X20BC1083 POWERLINK bus controller.

Lifecycle & replacement

Lifecycle status not indexed

No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.

Get a replacement quote or engineering help877-727-8757

IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.

Technical specifications

Short description
Communication moduleDeviceNet adapter (slave)
General information
Diagnostics / Module statusYes, using LED status indicator and software
Diagnostics / Network statusYes, using LED status indicator and software
Diagnostics / Data transferYes, using LED status indicator
Diagnostics / Terminating resistorYes, using LED status indicator
Certifications / CEYes
Certifications / UKCAYes
Certifications / CRA (Cyber Resilience Act)In preparation
Certifications / ATEXZone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
Certifications / ULcULus E115267 Industrial control equipment
Certifications / HazLoccCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
Certifications / DNVTemperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck)
Certifications / CCSYes
Certifications / LRENV1
Certifications / KRYes
Certifications / ABSYes
Certifications / BVEC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck
Certifications / KCYes
B&R ID code0xA715
Status indicatorsModule status, network status, data transfer, terminating resistor
Power consumption1.1 W
Additional power dissipation caused by actuators (resistive) [W]-
Interfaces
Interface IF1 / FieldbusDeviceNet adapter (slave)
Interface IF1 / Variant5-pin male multipoint connector
Interface IF1 / Max. distance500 m
Interface IF1 / Transfer rateMax. 500 kbit/s
Interface IF1 / Terminating resistorIntegrated in module
Interface IF1 / ControllernetX100
Electrical properties
Electrical isolationPLC isolated from DeviceNet (IF1)
Operating conditions
Mounting orientation / HorizontalYes
Mounting orientation / VerticalYes
Installation elevation above sea level / 0 to 2000 mNo limitation
Installation elevation above sea level / >2000 mReduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529IP20
Ambient conditions
Temperature / Operation / Horizontal mounting orientation-25 to 60°C
Temperature / Operation / Vertical mounting orientation-25 to 50°C
Temperature / Derating-
Temperature / Storage-40 to 85°C
Temperature / Transport-40 to 85°C
Relative humidity / Operation5 to 95%, non-condensing
Relative humidity / Storage5 to 95%, non-condensing
Relative humidity / Transport5 to 95%, non-condensing
Mechanical properties
NoteOrder 1x terminal block TB2105 separately.
SlotIn the X20 PLC and expandable bus controller X20BC1083

Documentation & CAD

Files hosted by B&R Industrial Automation; links open the official download page.

Datasheets

Manuals

3D CAD models

ECAD / EPLAN

Certificates

Get a quote for a replacement

Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.

📞 877-727-8757✉️ sales@iac.us.comContact us →

Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.