B&R X20PS9602
Supply for Compact-S CPU, X2X Link and internal I/O power supply Cost-effective power supply module for small X20 systems No galvanic isolation of supply and CPU / X2X Link power supply Expansion or redundancy of CPU / X2X Link power supply not possible through parallel operation of multiple power supply modules RS232 configurable as an online interface CAN bus The power supply module is used together with an X20 Compact-S controller. It has a feed for the Compact-S controller, X2X Link and the internal I/O power supply. This module is intended as a cost-effective power supply module for small X20 systems. The use of potential groups is possible. Expansion or redundancy of the X2X Link network with power supply module X20PS3300 or X20PS3310 is not possible. Expanding the X20 system with a bus transmitter is also not permitted.
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
Short description
| Power supply module | 24 VDC power supply module for Compact-S PLC, X2X Link power supply and I/O |
| Interfaces | 1x RS232, 1x RS485, 1x CAN bus |
General information
| Diagnostics / Module run/error | Yes, using LED status indicator and software |
| Diagnostics / CAN bus data transfer | Yes, using LED status indicator |
| Diagnostics / RS232 data transfer | Yes, using LED status indicator |
| Diagnostics / RS485 data transfer | Yes, using LED status indicator |
| Diagnostics / Overload | Yes, using LED status indicator and software |
| Power consumption / Internal I/O | 0.6 W |
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / CRA (Cyber Resilience Act) | In preparation |
| Certifications / ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| Certifications / UL | cULus E115267 Industrial control equipment |
| Certifications / DNV | Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
| Certifications / CCS | Yes |
| Certifications / LR | ENV1 |
| Certifications / KR | Yes |
| Certifications / ABS | Yes |
| Certifications / BV | EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
| B&R ID code | 0xEB04 |
| Status indicators | Operating state, module status, RS232, RS485, CAN bus |
| Power consumption for X2X Link power supply | 1.64 W |
| Additional power dissipation caused by actuators (resistive) [W] | - |
CPU / X2X Link power supply input
| Input voltage | 24 VDC -15% / +20% |
| Input current | Max. 0.7 A |
| Fuse | Integrated, cannot be replaced |
| Reverse polarity protection | Yes |
CPU / X2X Link power supply output
| Nominal output power | 7 W |
| Parallel connection | No |
| Redundant operation | No |
| Overload characteristics | Short-circuit proof, temporary overload |
Input I/O power supply
| Input voltage | 24 VDC -15% / +20% |
| Fuse | Required line fuse: Max. 10 A, slow-blow |
| Reverse polarity protection | No |
Output I/O power supply
| Nominal output voltage | 24 VDC |
| Behavior on short circuit | Required line fuse |
| Permissible contact load | 10 A |
Interfaces
| Interface IF1 / Signal | RS232 or RS485 |
| Interface IF1 / Variant | Connection via 12-pin terminal block X20TB12 |
| Interface IF1 / Transfer rate | Max. 115.2 kbit/s |
| Interface IF3 / Signal | CAN bus |
| Interface IF3 / Variant | Connection via 12-pin terminal block X20TB12 |
| Interface IF3 / Transfer rate | Max. 1 Mbit/s |
Electrical properties
| Electrical isolation | PLC/X2X Link supply not isolated from PLC/X2X Link power supply, and I/O supply not isolated from I/O power supply |
Operating conditions
| Mounting orientation / Horizontal | Yes |
| Mounting orientation / Vertical | Yes |
| Installation elevation above sea level / 0 to 2000 m | No limitation |
| Installation elevation above sea level / >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature / Operation / Horizontal mounting orientation | -25 to 60°C |
| Temperature / Operation / Vertical mounting orientation | -25 to 50°C |
| Temperature / Derating | See section "Derating". |
| Temperature / Storage | -40 to 85°C |
| Temperature / Transport | -40 to 85°C |
| Relative humidity / Operation | 5 to 95%, non-condensing |
| Relative humidity / Storage | 5 to 95%, non-condensing |
| Relative humidity / Transport | 5 to 95%, non-condensing |
Mechanical properties
| Note | Order 1x terminal block X20TB12 separately. Order 1x Compact-S PLC base X20BB5x, X20BB6x or X20BB7x separately. |
| Pitch | 12.5⁺⁰.² mm |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Datasheets
Manuals
ECAD / EPLAN
Certificates
- 64331_A1 BV Certificate of Compliance X20
- 64331_A1 BV Certificate of Compliance X20(de)
- ABS Certificate of Product Design Assessment - X20 IO Series
- CCS Type Approval Certificate - X20
- E115267 UL Certificate of Compliance X20
- EU Declaration ATEX X20
- EU Declaration of conformity PLC X20
- KR Type Approval Certificate MIL39390-AC003 (X20 System)
- Lloyds Register (X20 only)
- RINA Type Approval Certificate - X20 / Power Panel T30
- TAA00000BJ DNV Type Approval Certificate X20
- UK Declaration PLC X20
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.