B&R X20SLX811-1

Name: B&R X20SLX811-1
Brand: B&R Industrial Automation
SKU: X20SLX811-1

X20 SafeLOGIC-X controller (Safety+) 8 safe type A digital inputs, 4 pulse outputs, 24 VDC

Lifecycle & replacement

Lifecycle status not indexed

No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.

IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.

Short description

I/O module

8 safe type A digital inputs, 4 pulse outputs, 24 VDC, SafeLOGIC-X technology

General information

Diagnostics / Module run/error	Yes, using LED status indicator and software
Diagnostics / Inputs	Yes, using LED status indicator and software
Power consumption / Bus	0.4 W
Power consumption / Internal I/O	2.5 W
Additional power dissipation caused by actuators (resistive) [W] / Pulse outputs	0.8
Electrical isolation / Channel - Bus	Yes
Electrical isolation / Channel - Channel	No
Certifications / CE	Yes
Certifications / UKCA	Yes
Certifications / CRA (Cyber Resilience Act)	In preparation
Certifications / Functional safety	IEC 61508:2010, SIL 3 EN 62061:2005/A2:2015, SIL 3 EN ISO 13849-1:2015, Cat. 4 / PL e IEC 61511:2004, SIL 3
Certifications / Functional safety #2	EN 50156-1:2004
Certifications / ATEX	In preparation
Certifications / UL	cULus E115267 Industrial control equipment cULus E537419 Engine generator controller
B&R ID code	0x2F21
Status indicators	I/O function per channel, operating state, module status

Safety characteristics

Note	See section "Safety characteristics".

Safe digital inputs

Input filter / Hardware	≤150 µs
Input filter / Software	Configurable between 0 and 500 ms
Switching threshold / Low	<5 VDC
Switching threshold / High	>15 VDC
Quantity	8
Variant	Type A
Nominal voltage	24 VDC
Input characteristics per EN 61131-2	Type 1
Input circuit	Sink
Input voltage	24 VDC -15% / +20%
Input current at 24 VDC	Min. 2 mA to max. 3.28 mA
Input resistance	Min. 7.33 kΩ
Error detection time	100 ms
Insulation voltage between channel and bus	500 Veff
Line length between signal source (pulse output or external signal) and input	Max. 60 m with unshielded line Max. 400 m with shielded line

Pulse outputs

Quantity	4
Variant	Push-Pull
Nominal output current	50 mA
Output protection	Shutdown of individual channels in the event of overload or short circuit
Peak short-circuit current	0.5 A for 120 µs
Short-circuit current	15 mAeff
Leakage current when the output is switched off	0.1 mA
RDS(on)	80 Ω
Switching voltage	I/O power supply minus voltage drop due to RDS(on)
Total nominal current	200 mA

Operating conditions

Mounting orientation / Horizontal	Yes
Mounting orientation / Vertical	Yes
Installation elevation above sea level	0 to 2000 m, no limitation
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature / Operation / Horizontal mounting orientation	0 to 60°C
Temperature / Operation / Vertical mounting orientation	0 to 50°C
Temperature / Derating	See section "Derating".
Temperature / Storage	-40 to 85°C
Temperature / Transport	-40 to 85°C
Relative humidity / Operation	5 to 95%, non-condensing
Relative humidity / Storage	5 to 95%, non-condensing
Relative humidity / Transport	5 to 95%, non-condensing

Mechanical properties

Note	Order 1x safety-keyed terminal block separately. Order 1x safety-keyed bus module (single-width) separately.
Pitch	12.5⁺⁰.² mm

Files hosted by B&R Industrial Automation; links open the official download page.

Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.

Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.