IAC

B&R X67CA0B22.0150

PROFIBUS DP attachment cable, 15 m

Lifecycle & replacement

Lifecycle status not indexed

No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.

IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.

Technical specifications

Short description
AccessoriesPROFIBUS DP attachment cable, 4-pin, straight, 15 m
General information
Cable cross section / AWG2x 22 AWG
Cable cross section / mm²2x 0.34 mm²
NotePVC- and silicone-free PWIS- and halogen-free
DurabilityGood chemical and oil resistance Flame-retardant
Cable construction
Outer jacket / MaterialPolyurethane (PUR)
Outer jacket / ColorViolet
Wires / Wire insulationFoam polyethylene (PE) with skin layer
Wires / Wire colorsRed, green
Wires / TypeUncoated copper ETB1 Fine stranded wire (19x 0.15 mm), class 5
Wires / Stranding2 wires, stranded
Cable shieldTinned copper braiding, coverage >85%
Electrical properties
Nominal currentMax. 4 A / Contact at 40°C
Operating voltageMax. 60 V
Degree of insulationCategory II per IEC 61076-2
Conductor resistance≤55 Ω/km
Insulation resistance≥100 MΩ
Operating conditions
Degree of protection per EN 60529 / Connector/CouplingIP67, only when screwed in
Ambient conditions
Temperature / Transport-40 to 80°C
Temperature / Fixed installation-25 to 80°C
Temperature / Flexible installation-25 to 60°C
Mechanical properties
Dimensions / Length15 m
Dimensions / Diameter7.6 mm ±0.3 mm
Drag chain data / AccelerationMax. 5 m/s²
Drag chain data / Flex cyclesMin. 1 million
Drag chain data / VelocityMax. 3.3 m
Bend radius≥10x outer diameter

Documentation & CAD

Files hosted by B&R Industrial Automation; links open the official download page.

Certificates

Get a quote for a replacement

Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.

Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.