B&R X67DC2322
2 resolvers BRX/BRT evaluation 2 digital inputs and outputs for each The module is equipped with 2 resolver connections as well as 2 digital inputs and outputs for each. It is possible to evaluate BRX and BRT resolvers using a configurable sine gain of 1 or 0.25.
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
Short description
| I/O module | 2 resolver inputs, 2 digital inputs, 2 digital outputs |
General information
| Diagnostics / Outputs | Yes, using LED status indicator and software |
| Diagnostics / I/O power supply | Yes, using LED status indicator and software |
| Connection type / X2X Link | M12, B-coded |
| Connection type / Inputs/Outputs | M12, A-coded |
| Connection type / Encoder | M12, 12-pin, A-coded |
| Connection type / I/O power supply | M8, 4-pin |
| Power consumption / Internal I/O | 1 W |
| Power consumption / X2X Link power supply | 0.75 W |
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / CRA (Cyber Resilience Act) | In preparation |
| Certifications / ATEX | Zone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 - Max. 60°C TÜV 05 ATEX 7201X |
| Certifications / UL | cULus E115267 Industrial control equipment |
| Certifications / HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| Certifications / KC | Yes |
| B&R ID code | 0xA5C7 |
| Status indicators | I/O function per channel, supply voltage, bus function |
| Additional power dissipation caused by actuators (resistive) [W] | 12.5 W |
Resolver inputs
| Reference output / Output voltage | Typ. 4.4 Veff |
| Reference output / Output current | Max. 50 mAeff |
| Reference output / Frequency | 10 kHz |
| Resolver transformation ratio / BRX | 0.5 (±10%) |
| Resolver transformation ratio / BRT | 1 (±10%) |
| Quantity | 2 |
| Type | Differential |
| Angular position resolution | 14-bit |
| Short-circuit protection (reference output) | Yes |
| Input impedance | 10.4 kΩ - j*11.1 kΩ |
| Resolver type | BRX / BRT |
I/O power supply
| Nominal voltage | 24 VDC |
| Voltage range | 18 to 30 VDC |
Digital inputs
| Input filter / Hardware | ≤20 µs |
| Input filter / Software | - |
| Switching threshold / Low | <5 V |
| Switching threshold / High | >15 V |
| Quantity | 2 |
| Nominal voltage | 24 VDC |
| Input current at 24 VDC | Typ. 5 mA |
| Input circuit | Sink |
| Sensor power supply | 0.5 A summation current |
| Input delay | <1 ms |
Digital outputs
| Switching delay / 0 → 1 | Max. 500 µs |
| Switching delay / 1 → 0 | Max. 500 µs |
| Switching frequency / Resistive load | Max. 100 Hz |
| Quantity | 2 |
| Nominal voltage | 24 VDC |
| Nominal output current | 0.5 A |
| Total nominal current | 1 A |
| Output circuit | Source |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply |
Electrical properties
| Electrical isolation | Channel isolated from bus Channel not isolated from channel |
Operating conditions
| Mounting orientation / Any | Yes |
| Installation elevation above sea level / 0 to 2000 m | No limitation |
| Installation elevation above sea level / >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP67 |
Ambient conditions
| Temperature / Operation | -25 to 60°C |
| Temperature / Derating | - |
| Temperature / Storage | -40 to 85°C |
| Temperature / Transport | -40 to 85°C |
Mechanical properties
| Dimensions / Width | 53 mm |
| Dimensions / Height | 85 mm |
| Dimensions / Depth | 42 mm |
| Torque for connections / M8 | Max. 0.4 Nm |
| Torque for connections / M12 | Max. 0.6 Nm |
| Weight | 200 g |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Datasheets
Manuals
3D CAD models
ECAD / EPLAN
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.