B&R X67DO1332
8 A summation current per module All outputs with single-channel diagnostics for short circuit or overload Extremely short cycle times Outputs with short circuit protection Integrated protection for switching inductances The module is a digital output module for 24 VDC. It is equipped with 8 outputs for a source output circuit.
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
Short description
| I/O module | 8 digital outputs 24 VDC |
General information
| Diagnostics / Outputs | Yes, using LED status indicator and software |
| Diagnostics / I/O power supply | Yes, using LED status indicator |
| Connection type / X2X Link | M12, B-coded |
| Connection type / Outputs | 8x M8, 3-pin |
| Connection type / I/O power supply | M8, 4-pin |
| Power consumption / Internal I/O | 2 W |
| Power consumption / X2X Link power supply | 0.75 W |
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / CRA (Cyber Resilience Act) | In preparation |
| Certifications / ATEX | Zone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 - Max. 60°C TÜV 05 ATEX 7201X |
| Certifications / UL | cULus E115267 Industrial control equipment |
| Certifications / HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| Certifications / KC | Yes |
| B&R ID code | 0x1467 |
| Status indicators | I/O function per channel, supply voltage, bus function |
I/O power supply
| Power consumption / Actuator power supply | Max. 12 W |
| Nominal voltage | 24 VDC |
| Voltage range | 18 to 30 VDC |
| Integrated protective function | Reverse polarity protection |
Digital outputs
| Switching delay / 0 → 1 | <250 µs |
| Switching delay / 1 → 0 | <270 µs |
| Switching frequency / Resistive load | Max. 100 Hz |
| Continuous current per / Output | Max. 2 A |
| Continuous current per / Group | Max. 4 A (simultaneity factor = 50%) |
| Continuous current per / Module | Max. 8 A |
| Quantity | 8 |
| Execution | Current-sourcing FET |
| Nominal voltage | 24 VDC |
| Switching voltage | I/O power supply minus residual voltage |
| Nominal output current | 2 A |
| Total nominal current | 8 A |
| Output circuit | Source |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply |
| Actuator power supply | 0.5 A summation current |
| Diagnostic status | Output monitoring with 10 ms delay |
| Leakage current when the output is switched off | 5 µA |
| Switching on after overload shutdown | Approx. 10 ms (depends on the module temperature) |
| Group 1 | Channels 1 to 4 |
| Group 2 | Channels 5 to 8 |
| Residual voltage | <0.5 V at 2 A nominal current |
| Peak short-circuit current | <21 A |
| Braking voltage when switching off inductive loads | 50 VDC |
Actuator power supply
| Voltage | I/O power supply minus voltage drop for short-circuit protection |
| Voltage drop for short-circuit protection at 500 mA | Max. 2 VDC |
| Summation current | Max. 0.5 A |
| Short-circuit proof | Yes |
Electrical properties
| Electrical isolation | Channel isolated from bus Channel not isolated from channel |
Operating conditions
| Mounting orientation / Any | Yes |
| Installation elevation above sea level / 0 to 2000 m | No limitation |
| Installation elevation above sea level / >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP67 |
Ambient conditions
| Temperature / Operation | -25 to 60°C |
| Temperature / Derating | See section "Derating". |
| Temperature / Storage | -40 to 85°C |
| Temperature / Transport | -40 to 85°C |
Mechanical properties
| Dimensions / Width | 53 mm |
| Dimensions / Height | 85 mm |
| Dimensions / Depth | 42 mm |
| Torque for connections / M8 | Max. 0.4 Nm |
| Torque for connections / M12 | Max. 0.6 Nm |
| Weight | 180 g |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Datasheets
Manuals
3D CAD models
ECAD / EPLAN
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.