B&R X90PO210.08-00
9 to 32 VDC 8 PWM outputs 4 A per channel Current measurement Central cutoff X2X Link The PWM option board offers 8 additional analog outputs that can also be used as digital inputs/outputs. Communication to the mainboard is implemented using X2X Link. In addition, the PWM option board provides current measurement for each channel.
Lifecycle & replacement
No manufacturer-published lifecycle data for B&R part numbers is indexed here yet. Ask IAC to check availability and an upgrade path.
IAC stocks legacy spares and exchange units and quotes upgrade paths. Send us the nameplate details and we will confirm a compatible replacement.
Technical specifications
Short description
| I/O module | 8 digital inputs/outputs 9 to 32 VDC for 1-wire connections |
General information
| Diagnostics / Diagnostic outputs | In the application using current measurement |
| Electrical isolation / Digital - Digital | No |
| Certifications / UN ECE-R10 | Yes |
| Certifications / CE | Yes |
| Certifications / UKCA | Yes |
| Certifications / CRA (Cyber Resilience Act) | In preparation |
| B&R ID code | 0xEBC2 |
| Status indicators | - |
| Power consumption | 0.91 W |
Multi-function outputs
| Multifunction PWM outputs (MF-PWM) / Quantity | 8 |
| Multifunction PWM outputs (MF-PWM) / Functions | 4 A nominal current / channel PWM frequency 15 Hz to 1 kHz, digital input/output, sink/source circuit - configurable per channel, configurable software input filter, configurable switch-on/switch-off ramp, integrated output protection |
Digital inputs
| Input filter / Hardware | 100 µs |
| Input filter / Software | Default 1 ms, configurable between 0 and 25 ms in 0.1 ms increments |
| Quantity | 0 to 8, depends on the use of multifunction inputs/outputs |
| Input voltage | 9 to 32 VDC |
| Input current at 24 VDC | Typ. 2.7 mA |
| Input circuit | Sink/Source, configurable |
| Input resistance | Typ. 9 kΩ |
| Switching threshold | 45% supply voltage |
Digital outputs
| Quantity | 0 to 8, depends on the use of multifunction inputs/outputs |
PWM output
| Current measurement / Output format / Data type | INT 0x8001 to 0x7FFF |
| Current measurement / Output format / Current | 1 LSB = 305 μA |
| Current measurement / Current measurement range | ±10 A |
| Current measurement / Conversion time | 40 μs |
| Current measurement / Resolution | 12-bit (6 mA) |
| Current measurement / Accuracy | ±0.5% ±50 mA |
| Current measurement / Temperature drift | ±0.02%/°C ±1 mA/°C |
| Current measurement / Common mode error | ±3 mA/V |
| Quantity | 0 to 8, depends on the use of multifunction inputs/outputs |
| Nominal voltage | 12/24 VDC |
| Supply voltage (permissible range) | 9 to 32 VDC |
| Nominal current | 4 A |
| Summation current | 16 A |
| PWM frequency | 15 Hz to 1 kHz |
| Duty cycle | 0 to 100% in 0.1% steps, resolution <50 μs |
| Output circuit | Sink/Source |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads |
| Execution | Current-sourcing/Current-sinking FET |
| Diagnostic status | Output monitoring with 1 ms delay |
| Leakage current when the output is switched off | Max. 50 µA |
| Residual voltage | <0.1 V at 4 A nominal current |
| Peak short-circuit current | 50 A (max. 0.2 ms) |
Operating conditions
| Mounting orientation / Any | Yes |
| Degree of protection per EN 60529 | Up to IP69K |
Ambient conditions
| Temperature / Operation / Horizontal mounting orientation | -40 to 85°C housing surface |
| Temperature / Operation / Vertical mounting orientation | -40 to 85°C housing surface |
| Temperature / Storage | -40 to 85°C |
| Temperature / Transport | -40 to 85°C |
| Relative humidity / Operation | 5 to 100%, condensing |
| Relative humidity / Storage | 5 to 100%, condensing |
| Relative humidity / Transport | 5 to 100%, condensing |
Mechanical properties
| Dimensions / Width | 47 mm |
| Dimensions / Length | 95 mm |
Documentation & CAD
Files hosted by B&R Industrial Automation; links open the official download page.
Datasheets
Manuals
ECAD / EPLAN
Get a quote for a replacement
Industrial Automation Co. stocks, sources, and repairs B&R parts — new, refurbished, or exchange units with warranty.
Specifications from the official B&R product catalog. Always confirm against the datasheet for your exact revision.