Siemens Alarm 201122 — <location>Frekuensi pada input measuring probe terlalu tinggi

Arti

Frekuensi pulsa pada input measuring probe terlalu tinggi (objek drive termasuk infeed, SERVO, VECTOR, terminal/sensor module). Nilai fault (r0949, desimal) mengidentifikasi input: 1: DI/DO 9 (X122.8); 2: DI/DO 10 (X122.10); 4: DI/DO 11 (X122.11); 8: DI/DO 13 (X132.8); 16: DI/DO 14 (X132.10); 32: DI/DO 15 (X132.11); 64: DI/DO 8 (X122.7); 128: DI/DO 12 (X132.7). Reaksi: OFF1 (OFF2). Konfirmasi: IMMEDIATELY.

Penyebab umum dan diagnosis

Frekuensi pulsa pada input measuring probe terlalu tinggi.

Solusi

Kurangi frekuensi pulsa pada input measuring probe.

Di mana ditampilkan

Alarms appear on the SINUMERIK HMI (Diagnosis -> Alarms) with the alarm number and parameterized text; NC alarms are 5-6 digit numbers, cycle alarms 61000-62999, PLC/HMI alarms in their documented ranges.

Berlaku untuk nomor komponen berikut

• 6FC5203… — SINUMERIK OP 030/031 Slimline Operator Panel (FM-NC/810D/840D)
• 6FC5210… — SINUMERIK 810D/840D MMC 100/101 Operator Interface Unit
• 6FC5303… — SINUMERIK Operator Panel Front / Handheld Terminal
• 6FC5357… — SINUMERIK 840D NCU (Numerical Control Unit)
• 6FC5247… — SINUMERIK 840D NCU Accessories (Battery, NCU Box)